Removing the front bumper
06-29-2011, 04:22 PM
#4
Pedobear approved
iTrader: (1)
Join Date: May 2007
Location: Phoenix, AZ
Posts: 1,071
Likes: 0
Received 0 Likes
on
0 Posts
Easy as pie. Remove the side markers, tie 2 straps through the bumper's empty side marker holes, tie the straps to a truck's hitch. Gently feather the truck's gas, and then pin it to the floor.
You only asked about removing..nothing about reinstalling
You only asked about removing..nothing about reinstalling
06-29-2011, 05:41 PM
#6
If you have the gene for fixing things, taking things apart, putting them back together and working with tools (I guess it's called "being handy"), it's easy. If you don't, it's not.
Whenever you ask if something is "easy," if you want an honest answer, make sure their skill level isn't higher than yours.
Whenever you ask if something is "easy," if you want an honest answer, make sure their skill level isn't higher than yours.
06-29-2011, 06:59 PM
#7
very easy, remove side markers (1 screw each)
remove bolts where side markers are (1 each)
Remove bolts under the hood at top of bumper (5-8?)
Remove screws that hold the plastic undertray to the bumper, bottom side (6-8)
remove the plastic screws that hold the plastic fender liner to the bumper right by the tire (about 4 each side)
lift from the bottom and pull up and out simultaneously, should come right off.
Oh and disconnect fog wiring if you have them (they just have a plastic plug that connects, no tools needed)
remove bolts where side markers are (1 each)
Remove bolts under the hood at top of bumper (5-8?)
Remove screws that hold the plastic undertray to the bumper, bottom side (6-8)
remove the plastic screws that hold the plastic fender liner to the bumper right by the tire (about 4 each side)
lift from the bottom and pull up and out simultaneously, should come right off.
Oh and disconnect fog wiring if you have them (they just have a plastic plug that connects, no tools needed)
06-29-2011, 11:48 PM
#8
I HATE SPEEDBUMPS!
very easy, remove side markers (1 screw each)
remove bolts where side markers are (1 each)
Remove bolts under the hood at top of bumper (5-8?)
Remove screws that hold the plastic undertray to the bumper, bottom side (6-8)
remove the plastic screws that hold the plastic fender liner to the bumper right by the tire (about 4 each side)
lift from the bottom and pull up and out simultaneously, should come right off.
Oh and disconnect fog wiring if you have them (they just have a plastic plug that connects, no tools needed)
remove bolts where side markers are (1 each)
Remove bolts under the hood at top of bumper (5-8?)
Remove screws that hold the plastic undertray to the bumper, bottom side (6-8)
remove the plastic screws that hold the plastic fender liner to the bumper right by the tire (about 4 each side)
lift from the bottom and pull up and out simultaneously, should come right off.
Oh and disconnect fog wiring if you have them (they just have a plastic plug that connects, no tools needed)
Very detailed instructions, enough said.
Thread
Thread Starter
Forum
Replies
Last Post
Touge
Canada Forum
3
09-10-2015 08:07 AM
LMURailsplitter02
New Member Forum
1
09-06-2015 10:56 PM
Touge
Canada Forum
0
09-01-2015 10:47 PM
Jazzmeson
RX-8 Parts For Sale/Wanted
0
08-30-2015 02:42 AM
