repairing body damage - need advice
#1
Registered
Thread Starter
Join Date: Jan 2006
Location: Worcester, MA
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
repairing body damage - need advice
I dont think this post fits in eiher "car shine and care" or "body kits and exterior appearance". So here is where I am putting it.
My 2-week old car got hit in the parking lot and I have a major dent as a result. See https://www.rx8club.com/rx-8-discussion-3/foot-long-dent-my-2-week-old-rx-8-a-82208/ for pics. Scroll down on the same page for more pics.
Anyway I have 3 choices:
1. Get it repaired professionally - remove dents, paint and paint match (cost $1100)
2. Have a new door panel installed, paint and paint matched (cost $1600)
3. Take a course at a auto-training school where people get to work on their own cars. They also have their own dust-free paint booth and are supposedly pretty well equipped. I can fix the dents or replace panel, put whatever base coats I safely can and then leave the final top coat work and paint matching work to the experts. Cost ($400 for course + door panel if replacing + top coat work from third party).
I have 0 experience at doing any body work or paint work. Also people have told me that the door is made of aluminum and it will be hard to repair and not compromise structural strength. Given all this, should I go ahead with taking the course and fixing most of it myself ? Comments from people who have done body work are most appreciated.
My insurance deductible is $1000 and I could not catch the culprit yet - thats why I am going to all these lengths.
Thanks,
Bodi
My 2-week old car got hit in the parking lot and I have a major dent as a result. See https://www.rx8club.com/rx-8-discussion-3/foot-long-dent-my-2-week-old-rx-8-a-82208/ for pics. Scroll down on the same page for more pics.
Anyway I have 3 choices:
1. Get it repaired professionally - remove dents, paint and paint match (cost $1100)
2. Have a new door panel installed, paint and paint matched (cost $1600)
3. Take a course at a auto-training school where people get to work on their own cars. They also have their own dust-free paint booth and are supposedly pretty well equipped. I can fix the dents or replace panel, put whatever base coats I safely can and then leave the final top coat work and paint matching work to the experts. Cost ($400 for course + door panel if replacing + top coat work from third party).
I have 0 experience at doing any body work or paint work. Also people have told me that the door is made of aluminum and it will be hard to repair and not compromise structural strength. Given all this, should I go ahead with taking the course and fixing most of it myself ? Comments from people who have done body work are most appreciated.
My insurance deductible is $1000 and I could not catch the culprit yet - thats why I am going to all these lengths.
Thanks,
Bodi
#3
Registered
Thread Starter
Join Date: Jan 2006
Location: Worcester, MA
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered User
Join Date: Jul 2004
Location: I've shaken off the sands of SouthWest Asia and returned to Houston and Gulfport, MS
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Doesn't this come under your "uninsured motorist" coverage at much lower (if any) deductible??
#5
Registered
Do yourself a favor and pick up a copy of "How to Paint Your Car", by Dennis W. Parks. Read through that and you will quickly get the motivation to have a professional do the work. To do a professional job requires years of experience.
#6
Registered
Thread Starter
Join Date: Jan 2006
Location: Worcester, MA
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Doesn't this come under your "uninsured motorist" coverage at much lower (if any) deductible??
Read through that and you will quickly get the motivation to have a professional do the work. To do a professional job requires years of experience.
Bodi
#7
Registered
Originally Posted by bd32322
In the state of Massachusetts, USA, uninsured and underinsured coverage is only for bodily injury and not car damage.
I will try and get the book and read it. This project is under expert supervision tho - someone who has restored cars for 30 years. And I will leave the painting to the professionals. I want to fix the dents and or replace the panel and apply some filler/base coats or whatever I can do with the least amount of risk.
Bodi
I will try and get the book and read it. This project is under expert supervision tho - someone who has restored cars for 30 years. And I will leave the painting to the professionals. I want to fix the dents and or replace the panel and apply some filler/base coats or whatever I can do with the least amount of risk.
Bodi
I have a 2nd gen RX-7 that I would like to do some painting on, but after reading the book I have decided to not tackle such a project on my own.
#9
Registered
Thread Starter
Join Date: Jan 2006
Location: Worcester, MA
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TeamRX8
You don't want to do it yourself, supervised or not
What about a used one? Maybe the same color even. It might not match, but if it did you be saved from a ton of work. Switching the window gear, etc. in a new one can be a real pain.
What about a used one? Maybe the same color even. It might not match, but if it did you be saved from a ton of work. Switching the window gear, etc. in a new one can be a real pain.
I dont understand what you mean by switching the window gear. You mean taking off all the trim, and putting it back on to get access to the panel from the rear?
Bodi
Thread
Thread Starter
Forum
Replies
Last Post
Jst4fun
RX-8 Parts For Sale/Wanted
18
04-17-2021 07:43 AM