an RX8er's rebuild thread
#1102
Are you not using the stock air box tray?
Next week I plan on building a custom one that goes all the way across from the fuse box to the ecu cause I plan on relocating the battery to the trunk. I'll be using aluminum sheet, I would stay away from Stainless Steel because of the added weight. If you guys don't have something working by next week let me know, I can send you over the dimensions of everything when it's done.
Next week I plan on building a custom one that goes all the way across from the fuse box to the ecu cause I plan on relocating the battery to the trunk. I'll be using aluminum sheet, I would stay away from Stainless Steel because of the added weight. If you guys don't have something working by next week let me know, I can send you over the dimensions of everything when it's done.
I agree on the aluminum, the SS was just somthing handy and free
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Please do look forward to seeing the results!
#1105
well fail again!
I took off my UIM so I could swap my airpump soliniod with my SSV (got p0661), also wanted to install my oil filter relocation set up. they sent me the wrong freaking size (always test fit before assembly)....bastards
here is the filter end of the set up, LAP was out of the filter I wanted, this was the first I found that fit, completly temporary
![Name: 2012-06-29220812-1.jpg
Views: 51
Size: 197.9 KB](https://www.rx8club.com/attachments/series-i-tech-garage-22/232021d1501232991-rx8ers-rebuild-thread-2012-06-29220812-1.jpg)
another issue has reared its ugly head, last night and this morning as I climb above 6500RMP there is low power and periodic hesitaion, I assume that this could be related to the SSV soliniod but it is different that the 4500rpm blip I have been expierencing (doesnt the SSV kick in at 5500?) Part of me thinks fuel pump maybe a culprit because I have filled up 4-5 times with the car running.
on a good note I got my switch so I can shut off my oil cooler fan
![Anger](https://www.rx8club.com/images/smilies/anger.gif)
here is the filter end of the set up, LAP was out of the filter I wanted, this was the first I found that fit, completly temporary
![Name: 2012-06-29220812-1.jpg
Views: 51
Size: 197.9 KB](https://www.rx8club.com/attachments/series-i-tech-garage-22/232021d1501232991-rx8ers-rebuild-thread-2012-06-29220812-1.jpg)
another issue has reared its ugly head, last night and this morning as I climb above 6500RMP there is low power and periodic hesitaion, I assume that this could be related to the SSV soliniod but it is different that the 4500rpm blip I have been expierencing (doesnt the SSV kick in at 5500?) Part of me thinks fuel pump maybe a culprit because I have filled up 4-5 times with the car running.
on a good note I got my switch so I can shut off my oil cooler fan
![Name: 2012-06-29220758.jpg
Views: 48
Size: 156.2 KB](https://www.rx8club.com/attachments/series-i-tech-garage-22/232022d1501232991-rx8ers-rebuild-thread-2012-06-29220758.jpg)
#1110
Hi guys,
I have been lurking and snooping the threads around here while I get my block out... well, I got it out, little unorthodox, I am afraid, but its out. (I dropped everything out the bottom). I am just now getting to a point where I would like to jump in here or start a parallel thread for my rebuild to reduce confusion. I am in Louisiana (Baton Rouge Area) if anyone knows a local/regional specialist I would be happy to work direct with them.
https://skydrive.live.com/redir?resi...E-UL6R0VuC1KY4
Click here for recent image of block as it sits
Sorry if this does not work, I am new to this forum and posting pics seems to require I host them elsewhere
I have been lurking and snooping the threads around here while I get my block out... well, I got it out, little unorthodox, I am afraid, but its out. (I dropped everything out the bottom). I am just now getting to a point where I would like to jump in here or start a parallel thread for my rebuild to reduce confusion. I am in Louisiana (Baton Rouge Area) if anyone knows a local/regional specialist I would be happy to work direct with them.
https://skydrive.live.com/redir?resi...E-UL6R0VuC1KY4
Click here for recent image of block as it sits
Sorry if this does not work, I am new to this forum and posting pics seems to require I host them elsewhere
#1111
WENTGERMAN
iTrader: (6)
Hi guys,
I have been lurking and snooping the threads around here while I get my block out... well, I got it out, little unorthodox, I am afraid, but its out. (I dropped everything out the bottom). I am just now getting to a point where I would like to jump in here or start a parallel thread for my rebuild to reduce confusion. I am in Louisiana (Baton Rouge Area) if anyone knows a local/regional specialist I would be happy to work direct with them.
https://skydrive.live.com/redir?resi...E-UL6R0VuC1KY4
Click here for recent image of block as it sits
Sorry if this does not work, I am new to this forum and posting pics seems to require I host them elsewhere
I have been lurking and snooping the threads around here while I get my block out... well, I got it out, little unorthodox, I am afraid, but its out. (I dropped everything out the bottom). I am just now getting to a point where I would like to jump in here or start a parallel thread for my rebuild to reduce confusion. I am in Louisiana (Baton Rouge Area) if anyone knows a local/regional specialist I would be happy to work direct with them.
https://skydrive.live.com/redir?resi...E-UL6R0VuC1KY4
Click here for recent image of block as it sits
Sorry if this does not work, I am new to this forum and posting pics seems to require I host them elsewhere
#1113
2004 AT Rebuild - photo narrative
Here is a link to an unnarrated pictorial of the refrence pics I took for the last step in the manual... put back in reverse order... I will continue to update the break down for the same purposes. Any thoughts on things you may already see, or advice as I get the housings opened up regarding what all is good and what all needs trashing I would appreciate it. I am basically lookg to put this thinkg back to mostly stock with maybe a few cosmetic upgrades to shine for potential buyers as I will most likely have to sell it.
http://sdrv.ms/N39zrj
http://sdrv.ms/N39zrj
#1117
Those RPM’s make me think the SSV isn’t my “immediate” issue.....I do have code p0661 and a noticeable loss of power in the high RPM but it’s not consistent. I did swap the air pump and SSV solenoids thinking that would resolve the issue but the hesitation is still there. Again this is what leads me to believe the issues is fuel pump (or something of the like) and the SSV code is "distracting me" from the true problem.
#1122
I dont want to hide the code because I have a problem. there is some sort of "mechanical failure" randomly in the 6k+ RPM range......you can feel the power come and go.
part of me just wants to eliminate the fuel pump/filter from being the issue because its 128k, had very heavy premix run through it and I have been filling it up while the car is running
part of me just wants to eliminate the fuel pump/filter from being the issue because its 128k, had very heavy premix run through it and I have been filling it up while the car is running
#1123
SARX Legend
iTrader: (46)
![Lol](https://www.rx8club.com/images/smilies/lol.gif)
My APV code was still there and I have checked everything and everything seems to be working fine so I just blocked the code.
I think I have an extra fuel pump laying around. I also have my fancy new fuel pump removal tool
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#1124
bandaid FTW YO!!!!! ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
I was thinking about this on the way home.....If I have P0661 (low circuit) and I swap solenoids with the Air pump and still have the same code could the issue be in the actuator and that causes the solenoid to read incorrectly? There are only 4 freaking things there, solenoid, actuator, position switch and the valve itself.
maybe the SSC is throwing a hissy fit because I ported/polished everything but it
....poor bastard
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
I was thinking about this on the way home.....If I have P0661 (low circuit) and I swap solenoids with the Air pump and still have the same code could the issue be in the actuator and that causes the solenoid to read incorrectly? There are only 4 freaking things there, solenoid, actuator, position switch and the valve itself.
maybe the SSC is throwing a hissy fit because I ported/polished everything but it
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
#1125
![Lol](https://www.rx8club.com/images/smilies/lol.gif)
My APV code was still there and I have checked everything and everything seems to be working fine so I just blocked the code.
I think I have an extra fuel pump laying around. I also have my fancy new fuel pump removal tool
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Bowdown](https://www.rx8club.com/images/smilies/bowdown.gif)
I am good with masking the APV code no biggy there, just need to figure out the SSV bs cause it suck driving a car half way
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
we can try it out for sure but it will be temporay unitl I get a new one
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Rollinglaugh](https://www.rx8club.com/images/smilies/rollinglaugh.gif)