Sneek Peak of new Hymee Enhanced Product
#508
Registered
Join Date: Aug 2003
Location: Brisbane, Australia
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Spin9k
To get this all in one place, wo/searching the 25 thread pages, could you post some interface pics here of the released version and v1.1 beta improvements as well?
Interested to see it is serial (my lap has serial), what is the port data rate?
If all this is too much and will be the site anyway, it's Ok if you just let me wait...just anticipating :D
Interested to see it is serial (my lap has serial), what is the port data rate?
If all this is too much and will be the site anyway, it's Ok if you just let me wait...just anticipating :D
The serial connection runs at 19200 baud. The interface has an internal buffer. Speed is limited by the time it takes for the PCM to respond and also to a lesser effect by the CAN bus.
#509
Registered
Join Date: Aug 2003
Location: Brisbane, Australia
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lurch519
not that it matters because i am going to be buying one of these anyway, but will this allow you to make any changes to anything, or is this just a monitoring device?
Edit: Except to clear the MIL/CEL and freeze frame data. I'm still working on the "Add horses" button
Last edited by sco; 05-25-2005 at 06:00 AM.
#511
Registered
Join Date: Aug 2003
Location: Brisbane, Australia
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hymee
Up to Double the Data Rate of 1.0 (live gauges and logging). Our serial hardware and software protocols allows sCANalyser Live 1.1 to log up to 6 distinct PIDS every 40 milliseconds (approx). That is twice as fast as 1.0 (80 ms). The same hardware as shipped with 1.0 is used.
Thanks everyone for your kind words too. Well timbo, at least you were warm - you can take any help you can get this time of year in Canberra right? (I grew up in Wagga Wagga... I know how cold it can get)
Last edited by sco; 05-25-2005 at 06:02 AM.
#513
Race Steward
iTrader: (1)
Originally Posted by sco
I was surprised that there have been no oohs and aahs on this.... I thought this was pretty cool. More frequent data sampling will help give you a more accurate picture of what is going on.
cut - back to the footy :p
Cane Toads 13
'roaches NIL
Cheers,
Hymee.
#514
Race Steward
iTrader: (1)
Originally Posted by sco
There will be heaps of screen shots on the web site, so I won' t post them here.
The serial connection runs at 19200 baud. The interface has an internal buffer. Speed is limited by the time it takes for the PCM to respond and also to a lesser effect by the CAN bus.
The serial connection runs at 19200 baud. The interface has an internal buffer. Speed is limited by the time it takes for the PCM to respond and also to a lesser effect by the CAN bus.
Waddaya reckon of the User Manual so far? Perhaps we should just post it as the "marketing colateral"
Cheers,
Hymee.
#520
Race Steward
iTrader: (1)
Originally Posted by Speed Racer
Will there be a way to upgrade to the tuner version once it is available or will we have to purchase new hardware/software at full price?
That said... The plan is that the current hardware can be used. It would be a software upgrade only if you already had the hardware. We are also looking at using the same hardware to have a version that can re-flash Mazda files (they can be obtained from www.mazdatechinfo.com).
Cheers,
Hymee.
#521
New Member
Please stop the footy
On a serious note, to map a reflash to upload with the available hardware, you have to first get the data (map) from the PCM. Have you isolate the info being uploaded by the Mazda WDS and see what they are yet?
Then I guess is to understand and write a program to change it.
Last is to upload and wa la. Tune for every single RX-8 in Australia ... and around the world
.... I just waken up and back to reality.
"Hey Mark and Ross where is my manual, and CD update ?"
On a serious note, to map a reflash to upload with the available hardware, you have to first get the data (map) from the PCM. Have you isolate the info being uploaded by the Mazda WDS and see what they are yet?
Then I guess is to understand and write a program to change it.
Last is to upload and wa la. Tune for every single RX-8 in Australia ... and around the world
.... I just waken up and back to reality.
"Hey Mark and Ross where is my manual, and CD update ?"
#522
Race Steward
iTrader: (1)
Taka,
You leave the hard stuff to us Surely we have prooven ourselves by know!
Cheers,
Hymee.
PS - The version you seek is not released yet, grasshopper. The manual is under the same pebble. Watch your email. You beta dudes will be the first to get it. You don't think I'm gunna send you a CD do you? It will be on the Web.
You leave the hard stuff to us Surely we have prooven ourselves by know!
Cheers,
Hymee.
PS - The version you seek is not released yet, grasshopper. The manual is under the same pebble. Watch your email. You beta dudes will be the first to get it. You don't think I'm gunna send you a CD do you? It will be on the Web.
#525
Bigus Rotus
iTrader: (3)
Originally Posted by Hymee
...We are also looking at using the same hardware to have a version that can re-flash Mazda files (they can be obtained from www.mazdatechinfo.com)....