So the oil level meter isn't really accurate is it...
#26
The Angry Wheelchair
iTrader: (14)
I'd like to know what the minimum level is before the gauge detects a drop and goes down. I'll see if I can find out any specs on this.
Last edited by Vlaze; 10-06-2009 at 03:21 PM.
#29
SARX Legend
iTrader: (46)
Yeah I run 0W-30 GC in the hottest weather aside from Arizona and some parts of Nevada and I have never had pressures that low. That just seems really low to me but it could be fine for all I know.
#30
Administrator
iTrader: (7)
vlaze: if the system loses ENOUGH pressure that the needle moves, you'll probably have already noticed the issue. Trust me, it's worthless even as a warning indicator. There is no evidence that it ever senses anything...
#31
SARX Legend
iTrader: (46)
Yeah a local member here had his pressure sending unit on by two or three threads and it was leaking like crazy and he had to add two quarts and his factory oil pressure gauge didn't budge.
#32
Administrator
iTrader: (7)
I'm pretty sure the oem isn't connectec to anything. (I think I remember Zoom44 mentioning it???)
#34
Administrator
iTrader: (7)
what sending unit?
#36
Out of NYC
iTrader: (1)
the sending unit is located behind the oil filter ----
Its useless because it does NOT have any sensing ability --- Its just an ON/OFF switch, if its sensing "no pressure", it means its either not working(which I dont give a **** about) or You have close to no oil pressure in the system --- which your engine would've blown up long before it had a chance to sense it.
the Oil light unit, which is located by the oil pan, is way more more useful than that pressure dummy switch. AT least if the oil light turns on you should have a little bit of oil left so you have enough time to stop your engine before serious damage occurs.
Its useless because it does NOT have any sensing ability --- Its just an ON/OFF switch, if its sensing "no pressure", it means its either not working(which I dont give a **** about) or You have close to no oil pressure in the system --- which your engine would've blown up long before it had a chance to sense it.
the Oil light unit, which is located by the oil pan, is way more more useful than that pressure dummy switch. AT least if the oil light turns on you should have a little bit of oil left so you have enough time to stop your engine before serious damage occurs.
Last edited by nycgps; 10-06-2009 at 11:11 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Sifu
RX-8 Parts For Sale/Wanted
3
08-30-2015 10:51 PM
RotaryRider
New Member Forum
11
07-20-2015 07:05 AM