Sohn Adapter and Pre mix
#101
#102
I’m not claiming anything either way, just that people go and play around with their MOP system without possibly considering that a wrong move/mistake could result in a premature demise of their engine.
.
.
#104
Crankcase oil was what the Mazda engineers chose to lubricate in the oil injection system. For those of us that use pre-mix we have to consider an oil that not only does the job lubricating but also mixes with gas and doesn't harm combustion, leave deposits, etc. so there's a different set of parameters for each application. I only use what I use from reading here and elsewhere, haven't got the knowledge or experience to advise anyone on what oil to use, but the logic makes sense to me that once you are using an adapter you pick the best oil for lubrication, period.
#105
#106
#110
You can run a modern high-quality synthetic anyway. There is no real consensus on oil choice, and what was true when the 8 came out is no longer true about modern oil, but at least with the Sohn you can choose what oil truth you want to believe and choose your shaft and injection oils accordingly.
#112
Usually 10w30 or 10w40 depending on climate. You won't damage the seals, but you may want to evaluate the general condition of your engine after the previous owner.
For more info have a look at rx8help.com, New Owners page.
For more info have a look at rx8help.com, New Owners page.
Thread
Thread Starter
Forum
Replies
Last Post