specs on an old 7
#2
No Gods For Me
I can tell you the 1981 RX7, it was 105HP, 100 FP torque. It was a 12A.
I would imagine the 84 was close to this. When did the GSL-SE come out? Didn't that have the 13B engine?
I would imagine the 84 was close to this. When did the GSL-SE come out? Didn't that have the 13B engine?
#3
mostly harmless
Join Date: Jun 2002
Location: Greater Vancouver Area, BC
Posts: 3,440
Likes: 0
Received 0 Likes
on
0 Posts
ahahahaha... what a car... the RX-8 has come by leaps and bounds.
if memory serves correct...
2600lb.
110hp, 90ish lb.ft on the 12A
but for the post-1988 RX-7's, i know by heart.
about 2800lb.
160hp, 130ish lbft. (as you can tell, i've never been one to focus on peak torque numbers
)
if memory serves correct...
2600lb.
110hp, 90ish lb.ft on the 12A
but for the post-1988 RX-7's, i know by heart.
about 2800lb.
160hp, 130ish lbft. (as you can tell, i've never been one to focus on peak torque numbers
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
#4
mostly harmless
Join Date: Jun 2002
Location: Greater Vancouver Area, BC
Posts: 3,440
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by kwolfman
When did the GSL-SE come out? Didn't that have the 13B engine?
When did the GSL-SE come out? Didn't that have the 13B engine?
that was 140hp, +120lb ft.
#6
1984 and '85 GSL-SE:
13B engine - 1300 cc, 135 HP, special six port design,
electronic fuel injection. 14 inch wheels standard. Larger
disc brakes. Limited slip differential. Power steering
optional. Improved interior. Separate oil cooler mounted
under radiator.
13B engine - 1300 cc, 135 HP, special six port design,
electronic fuel injection. 14 inch wheels standard. Larger
disc brakes. Limited slip differential. Power steering
optional. Improved interior. Separate oil cooler mounted
under radiator.
#7
for 1984:
12A Engine (6 port design)
1146 cc
100 hp @ 6000 rpm
105 lbft @ 4000 rpm
Compression ratio of 9.4:1
redline 7000 rpm
Manual Gear ratios:
3.67
2.22
1.43
1.00
0.83
Final drive 3.91
Curb Wt 2325 lbs
53/47 % wt distribution
Drag coeff of 0.33
13B Engine (6 port design)
1308 cc
135 hp @ 6000 rpm
133 lbft @ 2750 rpm
Compression ratio of 9.4:1
redline 7000 rpm
Manual Gear ratios:
3.62
2.19
1.42
1.00
0.76
Final drive 4.08
Curb Wt 2635 lbs
50/50 % wt distribution
Drag coeff of 0.31
HOPE THIS HELPS!! :D
12A Engine (6 port design)
1146 cc
100 hp @ 6000 rpm
105 lbft @ 4000 rpm
Compression ratio of 9.4:1
redline 7000 rpm
Manual Gear ratios:
3.67
2.22
1.43
1.00
0.83
Final drive 3.91
Curb Wt 2325 lbs
53/47 % wt distribution
Drag coeff of 0.33
13B Engine (6 port design)
1308 cc
135 hp @ 6000 rpm
133 lbft @ 2750 rpm
Compression ratio of 9.4:1
redline 7000 rpm
Manual Gear ratios:
3.62
2.19
1.42
1.00
0.76
Final drive 4.08
Curb Wt 2635 lbs
50/50 % wt distribution
Drag coeff of 0.31
HOPE THIS HELPS!! :D
#9
RX-8: Hmmmmmmmmmmmmm.....
Join Date: Feb 2003
Location: Toronto, Canada
Posts: 799
Likes: 0
Received 0 Likes
on
0 Posts
question
Boyz,
If I'm to look up data of vechicles of the past and present, where can I go to quickly look up these spec's ? Any ideas. Thanks.
-Smoker
If I'm to look up data of vechicles of the past and present, where can I go to quickly look up these spec's ? Any ideas. Thanks.
-Smoker
#10
Re: question
Originally posted by Smoker
Boyz,
If I'm to look up data of vechicles of the past and present, where can I go to quickly look up these spec's ? Any ideas. Thanks.
-Smoker
Boyz,
If I'm to look up data of vechicles of the past and present, where can I go to quickly look up these spec's ? Any ideas. Thanks.
-Smoker
#11
Oversteer = Bliss
Join Date: Oct 2002
Location: Sask, Canada
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
The specs on the early RX-7s are readily available at Beyond the Redline, a hosted site at teamf3cs.org. As for other cars, the free CarTest program has stats for a lot of older vehicles.
Thread
Thread Starter
Forum
Replies
Last Post
1.3_LittersOfFurry
Series I Trouble Shooting
9
09-22-2015 01:54 AM