SSV Cleanning question
01-06-2012 | 12:18 PM
#1
Thread Starter
I4NI
Joined: Jun 2006
Posts: 833
Likes: 2
From: Hawaii
SSV Cleanning question
Any gaskets need to be replaced when cleanning the SSV? I searched and watched the vids and it seems the only parts needed is Coolant. I'm guessing the thermostat housing has no gasket, O-ring? update: gonna replace the thermostat since there.
Cleanning the Eccentric Shaft Sensor so why not since half way there.
Thanks!
Cleanning the Eccentric Shaft Sensor so why not since half way there.
Thanks!
Last edited by Silver_Surfer; 01-06-2012 at 12:47 PM. Reason: adding info
01-06-2012 | 01:06 PM
#2
The gasket is usually re-usable..it is a metal rubber gasket
You should only need coolant...and the thermostat is a good idea if you have it all apart anyway. Thermostat should come with the gasket( it is a rubber seal on the thermostat circumference)...if not you need one as well.
You should only need coolant...and the thermostat is a good idea if you have it all apart anyway. Thermostat should come with the gasket( it is a rubber seal on the thermostat circumference)...if not you need one as well.
01-06-2012 | 01:16 PM
#3
You should be receiving your n00b card in the mail shortly ... 
https://www.rx8club.com/series-i-do-yourself-forum-73/what-belongs-diy-forum-163653/
.
https://www.rx8club.com/series-i-do-yourself-forum-73/what-belongs-diy-forum-163653/
.
Last edited by TeamRX8; 01-06-2012 at 01:18 PM.
01-06-2012 | 01:32 PM
#5
Thread Starter
I4NI
Joined: Jun 2006
Posts: 833
Likes: 2
From: Hawaii
You should be receiving your n00b card in the mail shortly ...
https://www.rx8club.com/showthread.php?t=163653
.
https://www.rx8club.com/showthread.php?t=163653
.
Where do you find these things
Honestly I cant figure out how to use the advance search.
Last edited by Silver_Surfer; 01-06-2012 at 01:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post
gwailo
New Member Forum
38
05-14-2024 07:57 AM