supporting the engine

02-20-2009 | 05:31 PM

#1

nuke0907

Thread Starter

Never Blend In

iTrader: (2)

Joined: Oct 2006

Posts: 4,524

Likes: 5

From: Summerville, SC

supporting the engine

i got some new motor mounts to switch out my old ones. i was wondering if there is a way to support the engine without using a hoist? would i be able to support my car with jackstands and use a floor jack to support the engine?

Reply Like

02-20-2009 | 06:11 PM

#2

invasion08

Registered

iTrader: (7)

Joined: Nov 2003

Posts: 2,079

Likes: 3

From: New jersey

Yes

Reply Like

02-20-2009 | 06:20 PM

#3

nuke0907

Thread Starter

Never Blend In

iTrader: (2)

Joined: Oct 2006

Posts: 4,524

Likes: 5

From: Summerville, SC

where would i place the jack?

Reply Like

02-20-2009 | 06:23 PM

#4

invasion08

Registered

iTrader: (7)

Joined: Nov 2003

Posts: 2,079

Likes: 3

From: New jersey

right under the oil pan, but a piece of 2x4 between the jack and oil pan

Reply Like

02-20-2009 | 06:26 PM

#5

nuke0907

Thread Starter

Never Blend In

iTrader: (2)

Joined: Oct 2006

Posts: 4,524

Likes: 5

From: Summerville, SC

it wont crush the oil pan?

Reply Like

02-20-2009 | 06:27 PM

#6

invasion08

Registered

iTrader: (7)

Joined: Nov 2003

Posts: 2,079

Likes: 3

From: New jersey

nope

Reply Like

02-20-2009 | 06:28 PM

#7

nuke0907

Thread Starter

Never Blend In

iTrader: (2)

Joined: Oct 2006

Posts: 4,524

Likes: 5

From: Summerville, SC

ok. cool. thanks.

Reply Like

02-20-2009 | 07:07 PM

#8

Charles R. Hill

Owner of BHR

iTrader: (7)

Joined: Nov 2003

Posts: 4,101

Likes: 45

Invasion is correct.

Reply Like

02-20-2009 | 07:10 PM

#9

nuke0907

Thread Starter

Never Blend In

iTrader: (2)

Joined: Oct 2006

Posts: 4,524

Likes: 5

From: Summerville, SC

hopefully i will switch them out when i verify i have the correct engine mount bracket. the one i got does not match the one in the TSB for worn out mounts.

i have the F185-39-021 and the TSB calls for F1Y5-39-020.

Reply Like