so i just took my car to get inspected and one of the sway bar links is broke. so i bought new ones, but what is the torgue spec for the bolts on the links? thanks

 

bump.
Sorry to bump this but does anyone know? also is it had to change the sway bar links?

 

Search, and ye shall be answered
(HINT: Click the link in my sig and ask the same question)

 

I did search I didn't find anything, also y couldn't u have just told me what I need to know,? It would have took the same amount of time to answer my question as it did to tell me to search

 

43.1-60.8 Nm

 

No, because then I would have had to search for the answer/ thread myself.
I did give you a very useful tool so that you can now do your own research on certain topics, instead of looking like a spoiled brat that wants everything handed to him. I could have just told you to search, noob. But, I didn't.
Good luck with your future.

PS thanks for only seeing the bad in what was essentially a helpful reply to your question

 

Tight Bit tighter than tight...and about half as tight as TIGHT

 

This information is in a couple of the suspension replacement DIYs on this forum. Very searchable.

Here is what I have previously pulled from my searches of this forum when I was looking for the same information.

Front Suspension:

Upper Control Arm Bolts (2X per side) 62.0 - 72.2 ft-lbs
Lower Shock Mounting Bolt (1 X per side) 57.68 - 76.26 ft-lbs
Piston Rod Nut (Compress spring before removing)(1 X per side) - 23.2 - 34.0 ft-lb
Sway Bar End Link Nuts (2X per side) 31.8 - 44.8 ft-lbs
Brake Hose Bracket Bolt (1X per side) 13.7 18.8 ft-lbs
Tower Bar Nuts (2X per side) 13.0-19.5 ft-lbs
Tower Bar Plate Nuts (3X per side) 34.1 -46.3 ft-lbs

Rear Suspension:

Upper Shock Bracket Nuts (inside trunk 2X per side) 27.5 - 38.2 ft-lbs
Shock Bracket to Shock assembly Bolts (2 X per side) 27.5- 38.2 ft-lbs
Upper shock Mounting Nuts (Inside truck on floor below mounting bracket 2X per side) 34.1 - 46.3 ft-lbs
Shock Mounting Bolt (Up from underneath car into trunk floor 1X per side) 17.4 -23.3 ft-lbs
Rear Control Link End Bolts (1X per side) 55.69-75.23 ft-lbs
Lower Shock Mounting Bolt (1X per side) 64.91-87.86 ft-lbs
Sway Bar End Link Nuts (2X per Side) 31.8-44.8 ft-lbs
Piston Rod Nut (compress spring before removing)(1 X per side) 23.2-34.0 ft-lbs