Tach Sweep on Starting - Flash indication?
07-18-2006 | 08:40 PM
#1
Thread Starter
Registered User
Joined: Apr 2004
Posts: 186
Likes: 0
From: Canyon Lake, TX
Tach Sweep on Starting - Flash indication?
Had the starter motor bulletin change done the other day (just for the heck - no real starting problem and got new plugs after 24K miles). Since then with a COLD start the tach swings full up - down to zero - then to correct reading. This only occurs when fully cold. It does not occur when the summer heat has warmed the car, even after sitting overnight in the garage if I sleep in. Feel this must be a flash indicator, but funny since it would not do it for a tech when the engine is warm. No other problem.
Is this a flash indication.
By the way Jim Ellis in Atlanta is a great dealer. They have done everything I wanted and all bulletins for free.
Is this a flash indication.
By the way Jim Ellis in Atlanta is a great dealer. They have done everything I wanted and all bulletins for free.
07-19-2006 | 12:42 AM
#2
Guest
Posts: n/a
i had this happen right after i got the new starter. it hasnt happened since. I posted about this and I believe someone said it happens after the memory has been reset. I forget which memory since there is NVRAM and something else. if it keeps happening to you, it probably isnt a good thing...
as for Jim Ellis in Atlanta, it depends who you deal with...
as for Jim Ellis in Atlanta, it depends who you deal with...
Thread
Thread Starter
Forum
Replies
Last Post
Audio Concepts ATL
New Member Forum
21
09-26-2021 02:59 PM
Touge
Canada Forum
0
07-28-2015 10:52 PM
dbarber
Series I Trouble Shooting
14
07-25-2015 02:34 PM
