Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

what the hell did I break.. what does it do?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 06-25-2006 | 06:12 PM
  #1  
globaljase's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 13
Likes: 0
what the hell did I break.. what does it do?

I was vaccuming up in the car and the top of the thing hit this plastic piece that sits right above the clutch pedal.. there is a box with a grey plastic thing about the diameter of an ink pen, when the clutch is pressed in, this plastic thing is let out of the box its attached to, when the clutch is returned/let off, it goes back inside the box (green tab on the top of the clutch hits it, makes it move in).. what is that, what does it do? I drove it around the block and nothing seemed different.. but nontheless its broken off, so to the little box the plastic thing goes in and out of, it thinks the clutch is depressed ALL the time now.

I superglued it back, and it seems to be fine temporarily.. ugg..

thanks
Old 06-25-2006 | 06:32 PM
  #2  
MazdaManiac's Avatar
Banned
iTrader: (3)
 
Joined: Oct 2003
Posts: 16,386
Likes: 26
From: Under my car
Clutch engagement sensor. How did you break it vacuuming?
It might affect your cruise control.
Old 06-25-2006 | 07:41 PM
  #3  
StealthTL's Avatar
Metatron
iTrader: (1)
 
Joined: Mar 2003
Posts: 7,284
Likes: 175
From: A Pacific Island.
Maniac....

The Maniac is right, it's the switch that turns off cruise before the clutch lets go.

Your cruise won't work if it thinks the clutch is always "in".

S
Old 06-28-2006 | 09:56 AM
  #4  
Haze's Avatar
Registered
 
Joined: May 2003
Posts: 1,116
Likes: 0
From: Philadelphia, PA USA
Yup, it's the cruise control sensor. If it is actually broken, your cruise control won't function.

There should be another one that engages when the clutch pedal is fully depressed telling the car that the transmission is fully disengaged so you can start the car. Car won't start without that one.
Old 06-28-2006 | 03:45 PM
  #5  
globaljase's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 13
Likes: 0
Thanks guys.. A little superglue fixed it right up.. it puts pressure on it when the clutch is released so it held itself inplace nicely until it dried..

The cruise WILL WORK with the thing broken off tho, but when I took it out of gear, the throttle still stays engaged obviously.. could get around it by cancelling the cruise b4 changing gears.. or just get the darn thing fixed.. a lil superglue was a good alternative.

thanks again
j
Old 06-29-2006 | 10:08 AM
  #6  
Haze's Avatar
Registered
 
Joined: May 2003
Posts: 1,116
Likes: 0
From: Philadelphia, PA USA
Wow, it works without that switch. That is pretty interesting. Alot of cars have that switch read the position as the clutch being up. This one must be reading the clutch as depressed. Neat. Thanks for the info.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Brokegang
New Member Forum
27
01-03-2016 01:45 PM
juicemantwon
New Member Forum
3
09-26-2015 01:30 PM
1.3_LittersOfFurry
Series I Trouble Shooting
9
09-22-2015 02:54 AM
PortedRotorTuner
NE RX-8 Forum
0
09-07-2015 02:06 AM
yapakanichi
Series I Tech Garage
3
08-25-2015 02:24 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 09:26 PM.