Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

[URGENT HELP] Need to identify this tube

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 08-30-2014 | 12:27 PM
  #1  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
[URGENT HELP] Need to identify this tube

Hi guys,

I desperately need some help here.

I was gonna have a look into replacing the ignition coil myself.

So,

1) I was removing the air intake inbox + air hose (which connects to the throttle body).

2) After that, I see the ignition coil, but after some look around, I know I cant replace it (lack of tool, need an extender arm).

3) So, I put back the parts together

4) BUT...... I HAVE AN EXTRA TUBE OUT OF NO WHERE.... can someone please help me to identify this tube, so that I can put it back?

Name:  m76rhAU.jpg
Views: 11
Size:  824.3 KB

Name:  PGIdSSC.jpg
Views: 11
Size:  957.8 KB

5) I also did start up the car, after putting back the intake... It seems fine, but I'm just very afraid, where this tube might belong to.... but I really cant see anywhere else this tube might to go..

PLEASE HELP !!

Last edited by vX-2; 08-30-2014 at 12:50 PM.
Old 08-30-2014 | 12:50 PM
  #2  
TimmyG's Avatar
Registered
iTrader: (1)
 
Joined: Jul 2010
Posts: 57
Likes: 0
From: Aylmer Ontario
You should post a pic under your hood of where you were working. It might be easier to see where it comes from if it's missing.

Posted From RX8Club.com Android App
Old 08-30-2014 | 12:52 PM
  #3  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,786
Likes: 455
From: San Antonio, Texas
That looks like just the protective sheathing that is on the heater hoses to prevent abrasion and not an actual hose. If it is really soft and flexible then that is definitely what that is, that is no heater hose or vacuum hose for the RX-8.
Old 08-30-2014 | 12:53 PM
  #4  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
Originally Posted by TimmyG
You should post a pic under your hood of where you were working. It might be easier to see where it comes from if it's missing.

Posted From RX8Club.com Android App
Technically, I was just removing the air-intake+hose.... I've put them all back together now.... uhrm, should I remove them again?
Old 08-30-2014 | 12:55 PM
  #5  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
Originally Posted by 9krpmrx8
That looks like just the protective sheathing that is on the heater hoses to prevent abrasion and not an actual hose. If it is really soft and flexible then that is definitely what that is, that is no heater hose or vacuum hose for the RX-8.
Could you pin point to me where it is? so that I can put it back?

http://foxed.ca/rx7manual/2003mazdar...HU0113W004.png

around what number?
Old 08-30-2014 | 01:02 PM
  #6  
TimmyG's Avatar
Registered
iTrader: (1)
 
Joined: Jul 2010
Posts: 57
Likes: 0
From: Aylmer Ontario
don't remove anything just snap a pic of the air box area where you were working. It will be a little easier to see if it's just a protective cover or a hose

Posted From RX8Club.com Android App
Old 08-30-2014 | 01:04 PM
  #7  
Kane's Avatar
Illudium Q-36 Space Moderator
iTrader: (1)
 
Joined: Jan 2007
Posts: 6,364
Likes: 43
From: PCB
Coolant overflow tank hose?
Old 08-30-2014 | 01:16 PM
  #8  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
Originally Posted by TimmyG
don't remove anything just snap a pic of the air box area where you were working. It will be a little easier to see if it's just a protective cover or a hose

Posted From RX8Club.com Android App
Name:  SUb1qB5.jpg
Views: 11
Size:  92.1 KB

Name:  xIlKOKx.jpg
Views: 11
Size:  83.7 KB
Old 08-30-2014 | 01:17 PM
  #9  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
Originally Posted by Kane
Coolant overflow tank hose?
does that connect to the air intake system? otherwise, I didn't touch it.
Old 08-30-2014 | 01:18 PM
  #10  
Kane's Avatar
Illudium Q-36 Space Moderator
iTrader: (1)
 
Joined: Jan 2007
Posts: 6,364
Likes: 43
From: PCB
No, it's on the coolant tank (see pics above), but you might have knocked it off....it's in the same area.
Old 08-30-2014 | 01:19 PM
  #11  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
Originally Posted by 9krpmrx8
That looks like just the protective sheathing that is on the heater hoses to prevent abrasion and not an actual hose. If it is really soft and flexible then that is definitely what that is, that is no heater hose or vacuum hose for the RX-8.
yes, kinda soft and flexible....

sorry, I'm a total newbie..

where's the heater hose or vacuum hose?
Old 08-30-2014 | 01:24 PM
  #12  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
Originally Posted by Kane
No, it's on the coolant tank (see pics above), but you might have knocked it off....it's in the same area.
same area?? uhrm, around where? sorry I'm really a total noob

http://foxed.ca/rx7manual/2003mazdar...HU0113W004.png

Can you use that as reference?
Old 08-30-2014 | 01:26 PM
  #13  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
I'm trying not to freak out as this is really my first time taking out the parts.... but because the dealership wants to charge me $300 labor just to replace the coils, I decided to have some courageous to try to do it myself... I really didn't expect this to happen on me ...
Old 08-30-2014 | 01:32 PM
  #14  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
also, the tube is a kinda straight, it doesn't look like it has been bent much.
Old 08-30-2014 | 01:38 PM
  #15  
TimmyG's Avatar
Registered
iTrader: (1)
 
Joined: Jul 2010
Posts: 57
Likes: 0
From: Aylmer Ontario
Originally Posted by vX-2
Originally Posted by TimmyG ?

don't remove anything just snap a pic of the air box area where you were working. It will be a little easier to see if it's just a protective cover or a hose

Posted From RX8Club.com Android App

in the first pic it looks like some hoses are missing the sheath. If you get take a top down pic that shows the whole engine behind the air box I could compare my engine bay

?

?
Posted From RX8Club.com Android App
Old 08-30-2014 | 01:39 PM
  #16  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
Originally Posted by Kane
No, it's on the coolant tank (see pics above), but you might have knocked it off....it's in the same area.
Kane:

is it this hose?
Name:  JBFJ6OK.jpg
Views: 10
Size:  46.3 KB

This seems abit too short !?
Old 08-30-2014 | 01:57 PM
  #17  
Kane's Avatar
Illudium Q-36 Space Moderator
iTrader: (1)
 
Joined: Jan 2007
Posts: 6,364
Likes: 43
From: PCB
Yeah, you're good on that. It looks too big to be a vacuum hose. So it must be a hose cover....how soft and easy is it to pinch?
Old 08-30-2014 | 01:58 PM
  #18  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
Originally Posted by Kane
Yeah, you're good on that. It looks too big to be a vacuum hose. So it must be a hose cover....how soft and easy is it to pinch?
very easy...

just my gut feeling, I think this is some kind of hose, because it's 8 inches long?

Last edited by vX-2; 08-30-2014 at 02:06 PM.
Old 08-30-2014 | 02:08 PM
  #19  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
Originally Posted by TimmyG
Posted From RX8Club.com Android App
OK Ok more pics

Name:  Y06XT2w.jpg
Views: 10
Size:  988.7 KB

Name:  TOJLXVs.jpg
Views: 10
Size:  850.4 KB

Name:  89AcDYP.jpg
Views: 10
Size:  965.4 KB

Name:  o2a5QOO.jpg
Views: 10
Size:  911.6 KB

Name:  BEkrYpd.jpg
Views: 10
Size:  925.5 KB
Old 08-30-2014 | 02:10 PM
  #20  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
I Have no re-collection, if I have pull this 8" hose out... and when I found it, it was next to my battery cover.....
Old 08-30-2014 | 02:30 PM
  #21  
TimmyG's Avatar
Registered
iTrader: (1)
 
Joined: Jul 2010
Posts: 57
Likes: 0
From: Aylmer Ontario
Looks to me to be the hose cover off of the oil filler breather line. in my car that hose is run to the passenger side of the engine

Posted From RX8Club.com Android App
Old 08-30-2014 | 02:31 PM
  #22  
Kane's Avatar
Illudium Q-36 Space Moderator
iTrader: (1)
 
Joined: Jan 2007
Posts: 6,364
Likes: 43
From: PCB
See the hose right behind your throttle body pictured above?

See the cover that is on it? Does your mystery hose look like that one? If so it's just a cover, I wouldn't sweat it much.
Old 08-30-2014 | 02:47 PM
  #23  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
Originally Posted by TimmyG
Looks to me to be the hose cover off of the oil filler breather line. in my car that hose is run to the passenger side of the engine

Posted From RX8Club.com Android App
uhrm, which one? mind to point it out?
Old 08-30-2014 | 02:47 PM
  #24  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
Originally Posted by Kane
See the hose right behind your throttle body pictured above?

See the cover that is on it? Does your mystery hose look like that one? If so it's just a cover, I wouldn't sweat it much.
yes it kinda does, feels the same
Old 08-30-2014 | 04:52 PM
  #25  
vX-2's Avatar
Thread Starter
Registered
iTrader: (2)
 
Joined: Jul 2008
Posts: 111
Likes: 0
From: Lincoln, Nebraska
I decided to give it another look, and took the air intake + air hose down again:

I hope to get some more input as to identifying this tube/hose and I'd just want to put it back (not being ****, but just abit afraid if I had messed up some stuff.

More pics:

Name:  qb4zNcC.jpg
Views: 9
Size:  932.1 KB

Name:  ivm1LWU.jpg
Views: 8
Size:  889.6 KB

Name:  0fjeUww.jpg
Views: 8
Size:  1,002.5 KB

Name:  LamV8S3.jpg
Views: 8
Size:  940.7 KB

Name:  guOpxbg.jpg
Views: 8
Size:  58.9 KB
Side question, this is where I ran my problem into, as I don't extender arm (not sure if this is correct term) onto my Rachet, I was stumped at that point, and could no longer go further, unless I go buy one or somehow able to remove the red circle wiring thing


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 05:23 AM.