TimmyG

iTrader: (1)

I don't know why you had to remove the hose that connect to the oil fill, but I would try putting that hose cover over that hose and if it slides over you found it.

vX-2

iTrader: (2)

AFTER studying and going through the forums DIY pics.

I think I've found where this tube belongs.....



I'm about 100% sure it's that, since mine didn't have it

vX-2

iTrader: (2)

I was thinking to clean the throttle body as well.

THANKS A BUNCH FOR THE HELP AS WELL !!!

infiltr_eight

@vX-2: The hose u showed first is the protective cover on the VFAD vacuum line under the Air box ... just slip it back over the vacuum line. (its the line going from the cylindrical chamber to the metal vacuum pipe which leads to the VFAD.

In the last pic u showed a clip ... u dont need to open the clip to move the harness away ... just take a small flat plier an press the tab underneath it (it's in a square hole in the coil bracket) while pulling the harness up.

Greetings Thomas

vX-2

iTrader: (2)

I will try that.... press the tab underneath?

on the other hand, I did buy a Ratchet extension