When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2004 Renesis Front Housing Cover - cracks or casting marks?
Hi all, I couldn't find any other mention of this topic, so I wanted to ask for a second opinion.
I just recently pulled a neglected Renesis from my 2004 Rx8 GT 6 Speed with around 89K miles on it, while cleaning it I noticed a lot of marks on the Front Cover Housing that look like cracks but also very well could be casting marks, I did not see anything leaking from the front cover before this, but the entire cover was CAKED in a good 1/2 cm worth of dirt mixed with oil which was concerning to say the least.
But, the "cracks" are raised slightly, and almost every "crack" I touched was sharp and occasionally caught on my finger and made it impossible to clean certain areas without ripping up a towel/paper towels. I would assume they are casting marks due to them being raised but the frequency of them in the cover is worrying. Unfortunately, I cannot take the housing off right now to check for cracks inside due to dealing with the dreaded eccentric shaft bolt removal.
Above is the picture I got today while cleaning, further pictures can be uploaded later, this was all I had for right now.
Like I said I couldn't find any other threads on this, I also couldn't find a detailed enough picture of the front housing to determine if all Rx8's came like this. If there is another thread on this topic please let me know.