AEM CAI sucked up water and now car runs rough.
#1
Registered
Thread Starter
Join Date: Oct 2010
Location: Hawaii
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
![Unhappy](https://www.rx8club.com/images/icons/icon9.gif)
so its been raining a lot and my cai sucked up some water all the way up to the maf. i figured that id let it dry out for a day but yesterday i started it up and it ran pretty rough and super rich. so i decided to take apart the cai and found lots of water in the intake tubes so i dried the tubes up and dried the maf. took it around the block and it still ran like it was running on one rotor and also noticed that the exhaust and front o2 sensor was glowing (probably from running way to rich i could smell a lot of fuel). took apart the intake again and found more water in the tubes around the maf
i missed a spot where water collected in a coupling and i guess the air filter wasnt completely dried out yet. so today i took it apart again today and dried everything completely. cranked it up and its still running very rough almost like its running on a single rotor. ahh been giving me a headache. also have CEL, DSC, and the T/C light(the one in the center of the tach) on.
my question is... could the maf be bad causing the engine to run rough? or could the cat be clogged since it was running way to rich?
thanks in advance!
![SHOCKED](https://www.rx8club.com/images/smilies/SHOCKED.gif)
my question is... could the maf be bad causing the engine to run rough? or could the cat be clogged since it was running way to rich?
thanks in advance!
#3
OMGITM!
iTrader: (15)
Join Date: Jan 2006
Location: Sunny Southern California
Posts: 3,513
Likes: 0
Received 6 Likes
on
6 Posts
Likely an issue with the MAF. Happened to me years ago with MS intake, ended up frying cat. Dealer replaced cat, MAF, and a couple other items under warranty - I was pretty lucky!
Be sure to take it easy on the car and definitely have the CEL read!
Be sure to take it easy on the car and definitely have the CEL read!
#4
Registered
Thread Starter
Join Date: Oct 2010
Location: Hawaii
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
yea i have a feeling that the maf is fried. oh well good reason to upgrade to a midpipe.
hopefully i can find someone with an obd reader. yea i wont be driving the car for awhile :/ ah
hopefully i can find someone with an obd reader. yea i wont be driving the car for awhile :/ ah
#5
Registered
Thread Starter
Join Date: Oct 2010
Location: Hawaii
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
update:
got new mafm cleaned plugs, deflooded, and checked cat (wasnt clogged). car now wont start at all...
pulled the coils and they need replacing (white spots on the bottom)
pulled the code but got nothing. ahh what a headache..
got new mafm cleaned plugs, deflooded, and checked cat (wasnt clogged). car now wont start at all...
pulled the coils and they need replacing (white spots on the bottom)
pulled the code but got nothing. ahh what a headache..
Thread
Thread Starter
Forum
Replies
Last Post
ktec
Series I Aftermarket Performance Modifications
3
07-29-2015 01:17 PM