Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

Change in the sound of your exhaust

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 07-24-2007 | 08:54 PM
  #1  
expo1's Avatar
Thread Starter
He's as bad as Can
 
Joined: Feb 2004
Posts: 4,309
Likes: 2
From: Manchester, NJ
Change in the sound of your exhaust

If for no reason the sound of your exhaust changes to that of a riced out civic or an old moped it just might be a large hole in a pipe. I was on the track this Friday and in addition to a P0302 Misfire the sound of the exhaust also changed. I thought it might have been related to the misfire. Once I got home and looked under the car I saw the hanger right before the differential broke off. I didn’t go off track or hit anything so I am not sure why it broke. I patched the hole with a cheap Auto Zone repair and the pipe is not loose so I will wait till a used one hits the boards. That pipe by the way is from a Greddy SP2 and has 76,000 miles on it.
Attached Thumbnails Change in the sound of your exhaust-dcp_2079.jpg.jpg   Change in the sound of your exhaust-100_4478_400x600.shkl.jpg   Change in the sound of your exhaust-100_4483_600x400.shkl.jpg  
Old 07-24-2007 | 09:21 PM
  #2  
RxJaye's Avatar
Registered
iTrader: (2)
 
Joined: Mar 2007
Posts: 130
Likes: 0
From: Lexington KY
greddy has warranty
Old 07-24-2007 | 09:26 PM
  #3  
supergoat's Avatar
I don't "smell good".
 
Joined: Dec 2001
Posts: 910
Likes: 0
From: Crowfield Plantation, SC
"Caution: Packing material may be sharp"

Then why use it to protect the contents???
Old 07-24-2007 | 09:35 PM
  #4  
expo1's Avatar
Thread Starter
He's as bad as Can
 
Joined: Feb 2004
Posts: 4,309
Likes: 2
From: Manchester, NJ
The box had those large staples in it, don't see them used much these days. It also seems I might in fact have three months left on the Greddy Warranty. I have some calls to make tomorrow, thanks RxJaye.
Old 07-24-2007 | 10:10 PM
  #5  
NgoRX8's Avatar
Registered
iTrader: (1)
 
Joined: Oct 2004
Posts: 10,239
Likes: 4
From: CA, Rowland Hts.
good luck with that.
Old 07-24-2007 | 10:15 PM
  #6  
expo1's Avatar
Thread Starter
He's as bad as Can
 
Joined: Feb 2004
Posts: 4,309
Likes: 2
From: Manchester, NJ
I need to look in my RX-8 file more often.
Not only do I have the invoice from the site I purchased the SP2 from back in 2004 I have the customer copy of the warranty registration card I filled out. Dam I am forgetting a lot more stuff since turning 40
I just scanned all that and emailed it to the address on http://www.greddy.com/gpp/
Attached Thumbnails Change in the sound of your exhaust-100_4485-be_533x800.shkl.jpg  
Old 07-26-2007 | 03:29 PM
  #7  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,869
Likes: 2,083
must have been that heavy @ss muffler ...
Old 07-27-2007 | 12:54 AM
  #8  
RxJaye's Avatar
Registered
iTrader: (2)
 
Joined: Mar 2007
Posts: 130
Likes: 0
From: Lexington KY
Let me know how well they take care of stuff under warranty, I have the same exhuast. No problems yet but you never know.
Old 07-28-2007 | 12:45 AM
  #9  
PaSs1oVeR's Avatar
Likes to eat rice.
 
Joined: Aug 2004
Posts: 132
Likes: 0
From: Lexington, KY
saw something very similiar on an Evo we had in the shop 2 weeks ago. hanger pulled right off the exhaust, but it was up around the midpipe area.
Hope they replace it for you, but if not, just have someone patch it then weld the hanger back on.
Old 07-28-2007 | 12:52 AM
  #10  
Cody Red's Avatar
always filling [the c]up
 
Joined: Apr 2006
Posts: 1,267
Likes: 0
From: Alice, Texas
goodluck with the greddy stuff expo
Old 07-29-2007 | 05:53 PM
  #11  
Easy_E1's Avatar
Registered
iTrader: (2)
 
Joined: Sep 2005
Posts: 7,675
Likes: 5
From: Bellevue WA
The last change in my exhaust tone was the engine failing.
Old 08-03-2007 | 05:24 PM
  #12  
Jedi54's Avatar
Administrator
iTrader: (7)
 
Joined: Mar 2004
Posts: 22,444
Likes: 2,799
From: The Dark Side
expo: any word from greddy?
Old 08-03-2007 | 07:13 PM
  #13  
expo1's Avatar
Thread Starter
He's as bad as Can
 
Joined: Feb 2004
Posts: 4,309
Likes: 2
From: Manchester, NJ
I will know for sure next week but it looks like I will be getting a whole new exhaust, It did require some work. The site I bought it from was not a authorized Greddy reseller. So I had to get them to contact whom they got the SP2 from and that company needed to contact Greddy. My filling out the warranty card was also a big plus. If I didn't I would have only been covered the first year. The other thing that went in my favor was Greddy now has a NE office about 30 miles from me and The person I talked to was cool. The key thing I learned is when you purchase parts with a warranty make sure they are an authorized reseller or find out how they got the part. I was not going to post till the exhaust was in my hand, you never know what ccould go wrong but I think I am ok on this one.
Old 08-03-2007 | 07:24 PM
  #14  
Jedi54's Avatar
Administrator
iTrader: (7)
 
Joined: Mar 2004
Posts: 22,444
Likes: 2,799
From: The Dark Side
crossing my fingers for ya, hopefully all works out as planned.
Old 08-03-2007 | 07:53 PM
  #15  
XDEEDUBBX's Avatar
RX8 HA HA
 
Joined: Aug 2003
Posts: 11,772
Likes: 5
From: Gardena Cali 310
wow, greddy welds are the best!
Old 08-03-2007 | 07:59 PM
  #16  
NgoRX8's Avatar
Registered
iTrader: (1)
 
Joined: Oct 2004
Posts: 10,239
Likes: 4
From: CA, Rowland Hts.
is it the weld? looks like it was the actual material there that was faulty. hope you get it replaced.
Old 08-04-2007 | 04:21 PM
  #17  
Razz1's Avatar
Mu ha.. ha...
 
Joined: Aug 2004
Posts: 14,361
Likes: 3
From: Cali
I think you need to sell your car. You put so many mods on it that the torque just ripped the exhaust pipe apart.
Old 08-04-2007 | 05:40 PM
  #18  
Jedi54's Avatar
Administrator
iTrader: (7)
 
Joined: Mar 2004
Posts: 22,444
Likes: 2,799
From: The Dark Side
Old 08-04-2007 | 05:48 PM
  #19  
expo1's Avatar
Thread Starter
He's as bad as Can
 
Joined: Feb 2004
Posts: 4,309
Likes: 2
From: Manchester, NJ
Originally Posted by Razz1
I think you need to sell your car. You put so many mods on it that the torque just ripped the exhaust pipe apart.
If I reomove the extra Chip I got off Ebay I should be ok.
Old 08-04-2007 | 05:59 PM
  #20  
Jedi54's Avatar
Administrator
iTrader: (7)
 
Joined: Mar 2004
Posts: 22,444
Likes: 2,799
From: The Dark Side
i thought it was mainly the magnets on the fuel tank and the Tornado intake mod.
Old 08-15-2007 | 08:25 PM
  #21  
expo1's Avatar
Thread Starter
He's as bad as Can
 
Joined: Feb 2004
Posts: 4,309
Likes: 2
From: Manchester, NJ
Greddy Comes Through

Picked up and installed my replacement SP2 today, Sure looks nice compaired to the almost 3 year old / 70,000 mile one. But looking over the welds they all were still good. The weld was so strong it took a section of pipe with it. Lesson learned is to send in that warranty card and make sure you ask if the retailer is an authorized dealer. Looks like any future exhausts I buy will be a Greddy. I couldn't help but make a short VIDEO right ckick / save as of my 8 with no exhaust, notice the dark stain on the right side of the tank, that is from the dime sized hole in the exhaust. Things could have been worse.
Attached Thumbnails Change in the sound of your exhaust-100_4510_800x533.shkl.jpg   Change in the sound of your exhaust-100_4507_640x426.shkl.jpg   Change in the sound of your exhaust-100_4504_640x426.shkl.jpg  

Last edited by expo1; 09-06-2008 at 05:58 PM.
Old 08-26-2007 | 02:09 AM
  #22  
E888S's Avatar
Registered User
 
Joined: Aug 2007
Posts: 9
Likes: 0
Hi found out I have same exhaust in my car I just don't know how long its been there cause I just bought the car few days ago in carmax, I'm a little worried, I have 04 and 25k miles on it should I be worried?
Old 08-26-2007 | 03:22 PM
  #23  
expo1's Avatar
Thread Starter
He's as bad as Can
 
Joined: Feb 2004
Posts: 4,309
Likes: 2
From: Manchester, NJ
since my SP2 lasted over 70,000 miles I would't worry yet.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kanthinar
New Member Forum
15
12-21-2015 02:24 PM
SupraG
RX-8's For Sale/Wanted
7
09-21-2015 01:09 AM
akagc
RX-8's For Sale/Wanted
7
08-11-2015 08:07 PM
yapakanichi
Series I Tech Garage
16
07-28-2015 04:44 PM
dbarber
Series I Trouble Shooting
14
07-25-2015 02:34 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 03:04 PM.