clutch cylinder required
#1
clutch cylinder required
hi guyz
as just b4 leaving pakistan for srilanka my rx8 had a clutch failiure. and the clutch pedal was getting jammed towards the floor with no power to it. how ever it would get fine from time to time and then function normally.
but on the last day it had totaly gone, so i called in my michanic and he asked me to get the 2 clutch cylinders for it he said that one would fit up and the other one down. pointing out towards a round disc on the drivers side hood section possitioned right in front of the driver.
now upon searching through google i was shown the clutch cylinder to look a lot different from what my michanic had shown me.
now kindly guide me through this
and from wheare can i get this particular product and at what price.
is it a big install or an easy one since id like to fix it as soon as i get back.
im sure experts can help me out on this one.......since we ve got the rx8 gurus out here
thxxxxxx
as just b4 leaving pakistan for srilanka my rx8 had a clutch failiure. and the clutch pedal was getting jammed towards the floor with no power to it. how ever it would get fine from time to time and then function normally.
but on the last day it had totaly gone, so i called in my michanic and he asked me to get the 2 clutch cylinders for it he said that one would fit up and the other one down. pointing out towards a round disc on the drivers side hood section possitioned right in front of the driver.
now upon searching through google i was shown the clutch cylinder to look a lot different from what my michanic had shown me.
now kindly guide me through this
and from wheare can i get this particular product and at what price.
is it a big install or an easy one since id like to fix it as soon as i get back.
im sure experts can help me out on this one.......since we ve got the rx8 gurus out here
thxxxxxx
#3
I suggest you do the whole new cylinder." yea i agree, i will have to locate the parts soon at a cheap price.
thxx(10x)
#4
Can someone please explain or give me a idea of how i am supposed to UNBOLT The master clutch cylinder as the screws are behind the wall? i cant seem to figure it out... i am trying to rebuild my master clutch cylinder, as it has failed. WOULD BE GREATLY APPRECIATED, THANK YOU!!!
Thread
Thread Starter
Forum
Replies
Last Post
Digitz0070
Series I Aftermarket Performance Modifications
55
07-25-2017 08:40 PM
hufflepuff
Series I Wheels, Tires, Brakes & Suspension
6
05-30-2016 10:45 AM