CRUISE MAIN LIGHT help!!!!
06-07-2011, 03:42 PM
#1
Registered User
Thread Starter
Join Date: Jul 2010
Location: oc
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
CRUISE MAIN LIGHT help!!!!
my cruise main light turned on yesterday been reasearching on why it turned on and how to turn off the light but no luck yet any advice??
06-08-2011, 12:21 AM
#4
Registered User
Thread Starter
Join Date: Jul 2010
Location: oc
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
yea this was an epic fail for some reason i thought i pressd the button like 10 times and still didnt turn off but today pressed it again and boom light off
06-08-2011, 05:48 PM
#7
02-04-2017, 04:04 PM
#11
Registered
Join Date: Dec 2016
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I'm a manual transmission RX8 owner in Europe and I repair car computers by the way.
I'd like to install cruse control to my European car (which was very rare here).
I already modify the PCM configuration and put the cruse wires on.
Now I can switch the yellow "Cruise Main" light on on the cluster, but it doesn't keep the speed and the green "Cruise" light doesn't light up, even though the fallowing: break switch OK, clutch switch OK, cluster led test OK (there is green cruise light as well).
Maybe the instrument cluster configuration is incorrect, I tried to rewrite asbuilt data in the cluster, but there is a byte, which I can't modify, the cluster doesn't accept it.
I need a whole eeprom dump from an RX8 cluster, which has cruise control (L56R= 93c56 in 16bit format)
or if somebody has any idea, what should I check, please let me know!
Cheers!
I'd like to install cruse control to my European car (which was very rare here).
I already modify the PCM configuration and put the cruse wires on.
Now I can switch the yellow "Cruise Main" light on on the cluster, but it doesn't keep the speed and the green "Cruise" light doesn't light up, even though the fallowing: break switch OK, clutch switch OK, cluster led test OK (there is green cruise light as well).
Maybe the instrument cluster configuration is incorrect, I tried to rewrite asbuilt data in the cluster, but there is a byte, which I can't modify, the cluster doesn't accept it.
I need a whole eeprom dump from an RX8 cluster, which has cruise control (L56R= 93c56 in 16bit format)
or if somebody has any idea, what should I check, please let me know!
Cheers!
Thread
Thread Starter
Forum
Replies
Last Post
MC36
SE RX-8 Forum
1
09-24-2015 10:02 PM
