csl

Need help to get a PDF copy of wiring diagram as my hazard light fuse keep blowing up.

Situation:

1. When use hazard light, relay buzz.
2. signal to right ok
3. signal to left, hazard light fuse blow. (bulb still ok)

What had I tried:

1. Remove head lights and signal bulbs, situation still the same.
2. Remove battery, not trigger the signal or hazard light, found continuity on the left hand side side marker bulb connector.


So I believe there is at least 1 spot that is short circuit. Hope anyone can pm me a link for the wiring diagram (tried google and yahoo search). I need to know the wiring routing. Thanks.

Jon316G

iTrader: (1)

The entire service manual can be downloaded here:
http://isomerica.net/~fluffy/Ren/RX8%20FSM/

I'll take a glance over the circuit and see if I can help out.

csl

Thanks you very much

Jon316G

iTrader: (1)

You sure it was a relay buzzing? Not seeing one in the circuit.
And its a pretty simple circuit with nothing between the fuse and the flash control module.
Might want to check continuity in the wiring to the module.

Jon316G

iTrader: (1)

In the 'BODY' manual on page 212 shows how to inspect the flasher module and which terminal is connected to the fuse.