HELP-Front Radio/ Control panel problem
#1
#3
#4
I am pretty sure there are several DIYs, but as I am too lazy to search here is a short summary:
-Turn loose the shift **** and take it off.
-With a screwdriver and a thin towel, lift up the cover (the one with the cup holders) and take it off.
-Unscrew the cigarette lighter assembly (2 screws) and remove it (don't forget to disconnect the 3 cables at the back).
-Remove the 4 (?) screws under the radio assembly.
-Put a screwdriver between the middle air outlets and the radio cover with a thin towel, and carefully push is. If you want, you can also have someone push from behind the glove box to make it easier and reduce the chance of scratching something.
Again, be carefull with the connectors.
Reassembly in reverse order.
No pics, sorry. Am at work.
-Turn loose the shift **** and take it off.
-With a screwdriver and a thin towel, lift up the cover (the one with the cup holders) and take it off.
-Unscrew the cigarette lighter assembly (2 screws) and remove it (don't forget to disconnect the 3 cables at the back).
-Remove the 4 (?) screws under the radio assembly.
-Put a screwdriver between the middle air outlets and the radio cover with a thin towel, and carefully push is. If you want, you can also have someone push from behind the glove box to make it easier and reduce the chance of scratching something.
Again, be carefull with the connectors.
Reassembly in reverse order.
No pics, sorry. Am at work.
#5
I am pretty sure there are several DIYs, but as I am too lazy to search here is a short summary:
-Turn loose the shift **** and take it off.
-With a screwdriver and a thin towel, lift up the cover (the one with the cup holders) and take it off.
-Unscrew the cigarette lighter assembly (2 screws) and remove it (don't forget to disconnect the 3 cables at the back).
-Remove the 4 (?) screws under the radio assembly.
-Put a screwdriver between the middle air outlets and the radio cover with a thin towel, and carefully push is. If you want, you can also have someone push from behind the glove box to make it easier and reduce the chance of scratching something.
Again, be carefull with the connectors.
Reassembly in reverse order.
No pics, sorry. Am at work.
-Turn loose the shift **** and take it off.
-With a screwdriver and a thin towel, lift up the cover (the one with the cup holders) and take it off.
-Unscrew the cigarette lighter assembly (2 screws) and remove it (don't forget to disconnect the 3 cables at the back).
-Remove the 4 (?) screws under the radio assembly.
-Put a screwdriver between the middle air outlets and the radio cover with a thin towel, and carefully push is. If you want, you can also have someone push from behind the glove box to make it easier and reduce the chance of scratching something.
Again, be carefull with the connectors.
Reassembly in reverse order.
No pics, sorry. Am at work.
Plz help me when you are free...
I'll try search again too...
Thank you...
Last edited by dennis55; 01-08-2013 at 03:50 AM.
#6
https://www.rx8club.com/do-yourself-...-install-7644/
This is a very good DIY picture thread. It's not that hard.
This is a very good DIY picture thread. It's not that hard.
#7
https://www.rx8club.com/do-yourself-...-install-7644/
This is a very good DIY picture thread. It's not that hard.
This is a very good DIY picture thread. It's not that hard.
WhatsMyIP.org | iPod RX-8 | Page 1
Last edited by dennis55; 01-09-2013 at 06:59 AM.
Thread
Thread Starter
Forum
Replies
Last Post
nivong
Europe For Sale/Wanted
0
09-02-2015 08:54 AM