HELP!! Immobilizer system issue
#1
Unbalanced & Unmedicated
Thread Starter
HELP!! Immobilizer system issue
I was doing the fog light rewire per the DIY sticky. I must have done something incorrectly because after the procedure the fog lights didn't come on at all.
So I reconnected the wire back to stock, and checked, all lights worked fine including the fogs and the car started normally. At that point I decided to leave it alone until I got further clarification.
Twenty minutes later I went out to head to Radio Shack and the car won't start.
Turn the key and get nothing! No crank, no clicking. Just a door ajar light and the flashing immobilizer symbol on the dash. I disconnected the battery, reconnected it, still nothing. Any suggestions??? I'm seriously stuck here and a search on the forum doesn't really answer how to disable or reset the immobilizer system.
So I reconnected the wire back to stock, and checked, all lights worked fine including the fogs and the car started normally. At that point I decided to leave it alone until I got further clarification.
Twenty minutes later I went out to head to Radio Shack and the car won't start.
Turn the key and get nothing! No crank, no clicking. Just a door ajar light and the flashing immobilizer symbol on the dash. I disconnected the battery, reconnected it, still nothing. Any suggestions??? I'm seriously stuck here and a search on the forum doesn't really answer how to disable or reset the immobilizer system.
#3
Unbalanced & Unmedicated
Thread Starter
Thanks RX8XTC.
It turns out I cooked the ignition fuse in my first attempt to do the fog light rewire. All good now, it starts and the fogs work independently.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Thread
Thread Starter
Forum
Replies
Last Post
nivong
Europe For Sale/Wanted
0
09-02-2015 07:54 AM
Nisaja
RX-8 Discussion
51
09-01-2015 04:29 AM
TomX8
New Member Forum
0
08-29-2015 09:37 AM
2004, bypass, dash, disable, disables, disabling, immobiliser, immobilizer, imobulizer, inmobilizer, mazda, problem, reset, rx8, system