Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

Intermittent Electrical Issues with DSC and ABS...

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 12-22-2020 | 01:36 PM
  #1  
Kanthinar's Avatar
Thread Starter
Registered
 
Joined: Jun 2014
Posts: 20
Likes: 2
From: United States of America
Intermittent Electrical Issues with DSC and ABS...

So I've recently started having the issue while driving that my DSC and ABS systems will "reset". By reset I mean the lights will turn on while driving without effecting other systems. I've tried to do a preliminary diagnostic prior to pouring over the pages of the electrical diagrams in detail.

I have a feeling there is a short in that subsystem and I thought I'd reach out to see if anyone here more experienced with them would have any ideas where to check first.
Old 12-23-2020 | 06:45 AM
  #2  
mazdaverx7's Avatar
RX-Heaven
iTrader: (6)
 
Joined: Sep 2008
Posts: 2,150
Likes: 192
From: Vermilion Ohio
The only time the DSC normally resets is when the battery is disconnected and the traction control light will illuminateas well. It's odd that they reset while driving. Have you scanned the car for any codes? I would start there and ensure your battery terminals are clean and tight and that the battery is good.
Old 12-24-2020 | 12:30 PM
  #3  
Kanthinar's Avatar
Thread Starter
Registered
 
Joined: Jun 2014
Posts: 20
Likes: 2
From: United States of America
I checked that and the fuses already... all appear to be tight and secure. I think reset isn't the correct word. The lights for those systems will come on and when I restart the car everything is fine....I'm leaning more toward a bad sensor somewhere or connection at this point. The problem is intermittent which led me to a short at first. The new problem now is I've no idea how to diagnose the DSC so its time to learn that system I guess...and hope I have the tools to do it.
Old 12-24-2020 | 02:37 PM
  #4  
Loki's Avatar
Registered
iTrader: (1)
 
Joined: Jun 2009
Posts: 8,007
Likes: 1,005
From: Montreal
Are the terminals clean in addition to be tight? What about grounds?
It sounds more like a problem with electrical supply than with the system itself.
Old 12-24-2020 | 10:40 PM
  #5  
Kanthinar's Avatar
Thread Starter
Registered
 
Joined: Jun 2014
Posts: 20
Likes: 2
From: United States of America
Yeah I pulled and cleaned them just to be safe when I was checking the issue the first time. I'll pull the airbox and check the grounds around there tomorrow.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jayh
Series I Tech Garage
23
06-05-2022 12:19 AM
diggyd357
Series I Tech Garage
11
03-06-2020 03:38 AM
revivo73
Series I Trouble Shooting
9
09-08-2013 05:49 PM
andreasy
Series I Tech Garage
3
04-12-2009 12:59 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 02:19 AM.