Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

Leaking Stainless Oil Line

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 08-19-2022 | 06:24 AM
  #1  
Killawatts's Avatar
Thread Starter
spent so much money
 
Joined: Jun 2016
Posts: 230
Likes: 23
Leaking Stainless Oil Line

After a lot of hassle, I found where my oil leak is coming from. I have aftermarket oil coolers and lines, the lines are braided steel. It seems to be leaking from behind the nut, not the threads. These lines are practically brand new, so I'm kind of at a loss as to what can be done, maybe the line itself is faulty? I've tried loosening and reseating, but the leak continues, even at idle.

Here's a video of the leak.

Appreciate any advice.
Old 08-19-2022 | 07:04 AM
  #2  
mazdaverx7's Avatar
RX-Heaven
iTrader: (6)
 
Joined: Sep 2008
Posts: 2,150
Likes: 192
From: Vermilion Ohio
Are the lines centered in the fitting properly and did you properly torque the line at the fitting?
Old 08-19-2022 | 08:22 AM
  #3  
Killawatts's Avatar
Thread Starter
spent so much money
 
Joined: Jun 2016
Posts: 230
Likes: 23
Originally Posted by mazdaverx7
Are the lines centered in the fitting properly and did you properly torque the line at the fitting?
I'm not sure what you mean as far as being centered. I believe the torque is around 35 ft lbs, I've tried various levels of tightness without over doing it, but at the least, it always has a small leak.
Old 08-19-2022 | 08:43 AM
  #4  
BigCajun's Avatar
Banned
iTrader: (1)
 
Joined: Jan 2013
Posts: 6,164
Likes: 2,697
Please tell me they're not Mishimito.
Old 08-19-2022 | 09:37 AM
  #5  
Killawatts's Avatar
Thread Starter
spent so much money
 
Joined: Jun 2016
Posts: 230
Likes: 23
Originally Posted by BigCajun
Please tell me they're not Mishimito.
No, these are from RX8 Performance, the lines say red horse performance on them.

Well, I kind of goofed up because I put PTFE tape on the fittings. Not supposed to do that on AN fittings apparently, woops.

After removing the tape and applying the right amount of torque (more torque than I really should have to), no leaks. Been fighting these god damn lines all night, but part of that was me just being a dumbass. Lesson learned.
Old 08-19-2022 | 10:57 AM
  #6  
BigCajun's Avatar
Banned
iTrader: (1)
 
Joined: Jan 2013
Posts: 6,164
Likes: 2,697
Originally Posted by Killawatts
No, these are from RX8 Performance, the lines say red horse performance on them.

Well, I kind of goofed up because I put PTFE tape on the fittings. Not supposed to do that on AN fittings apparently, woops.

After removing the tape and applying the right amount of torque (more torque than I really should have to), no leaks. Been fighting these god damn lines all night, but part of that was me just being a dumbass. Lesson learned.
OK, glad you figured it out.
I just bought a Mishimoto line.
I'm going to be sure not to use tape.🤔
Old 08-20-2022 | 10:54 AM
  #7  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,869
Likes: 2,083
AR

Originally Posted by Killawatts
god damn
there’s your major malfunction, right there …
.
The following users liked this post:
cstrat94 (08-20-2022)
Old 08-20-2022 | 11:51 AM
  #8  
Killawatts's Avatar
Thread Starter
spent so much money
 
Joined: Jun 2016
Posts: 230
Likes: 23
Originally Posted by TeamRX8
there’s your major malfunction, right there …
.


I apologize profusely if my obscene language towards your sky-buddy has offended your delicate sensibilities. I will give myself ten lashes in self flagellation.

Last edited by Killawatts; 08-20-2022 at 11:54 AM.
Old 08-20-2022 | 12:38 PM
  #9  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,869
Likes: 2,083
you don’t really expect me to get upset or try to reason with someone who can’t even install or fix a leak on a pre-made oil line kit; and becomes so frustrated about something so simple to the point he publicly writes curses in the name of the highest power that he also then claims doesn’t actually exist, do you? Where’s the sensibility in any of those things?

I’ll take delicates sensibilities as a sincere compliment and gifted blessing over receiving a complete lack of them instead, any day.
.

Last edited by TeamRX8; 08-20-2022 at 12:41 PM.
Old 08-20-2022 | 01:05 PM
  #10  
Killawatts's Avatar
Thread Starter
spent so much money
 
Joined: Jun 2016
Posts: 230
Likes: 23
Originally Posted by TeamRX8
you don’t really expect me to get upset or try to reason with someone who can’t even install or fix a leak on a pre-made oil line kit; and becomes so frustrated about something so simple to the point he publicly writes curses in the name of the highest power that he also then claims doesn’t actually exist, do you? Where’s the sensibility in any of those things?

I’ll take delicates sensibilities as a sincere compliment and gifted blessing over receiving a complete lack of them instead, any day.
.
I did install the lines and fix the leak, though. I've replaced the engine, transmission, fuel system, cooling system, interior, shocks, battery relocation, and on and on. But these lines were a pain to get to seal; a quick search shows I was not the only one. She's looking good, finally.




Yes yes, your sky buddy loves you. Believe in whatever you want, it's no shock that older folks like yourself find religion late in life. Something to cope with the fact that you'll be worm food relatively soon. I personally find it shows a weak mind; can't bear to see your life come to an end, so start to believe in a fairy tale that promotes a second life. Don't worry, death is not painful, it's just like it was before you were born; to the nothingness you will return.



Old 08-20-2022 | 02:35 PM
  #11  
kevink0000's Avatar
77 cylinders, 4 rotors...
 
Joined: Sep 2017
Posts: 816
Likes: 251
From: Arizona
Killawatts:

Saying this for your benefit only. Not trying to battle or match wits.


Read more. Please.

At the very least, you sound very sure about something you can never be that sure about. If you are wrong, well...

Try this one to start:
Old 08-20-2022 | 05:26 PM
  #12  
BigCajun's Avatar
Banned
iTrader: (1)
 
Joined: Jan 2013
Posts: 6,164
Likes: 2,697
Seriously guys, y'all gonna get banned.
The following users liked this post:
kevink0000 (08-20-2022)
Old 08-20-2022 | 08:40 PM
  #13  
Killawatts's Avatar
Thread Starter
spent so much money
 
Joined: Jun 2016
Posts: 230
Likes: 23
Originally Posted by kevink0000
Killawatts:

Saying this for your benefit only. Not trying to battle or match wits.


Read more. Please.

At the very least, you sound very sure about something you can never be that sure about. If you are wrong, well...

Try this one to start:
I've read plenty sir. Not interested in fairy tales and superstition. If you believe in it, good for you, not my business. Even what you just wrote is one of the reasons "Well, if you're wrong you'll be punished!!" Yeah no, I will not buy into an ideology of fear. That's not to say that there is no wisdom in the biblical teachings, there certainly is.


And Cajun if Team gets banned he'll just go cry to the mods, as has happened before. At least others that did get banned had some dignity about it. I would much rather get banned than have to treat one particular individual as a protected class, you poke me, I will poke back. This is an internet forum, not a penal colony. I didn't instigate this whole exchange.

Last edited by Killawatts; 08-20-2022 at 09:09 PM.
Old 08-21-2022 | 05:35 PM
  #14  
StealthTL's Avatar
Metatron
iTrader: (1)
 
Joined: Mar 2003
Posts: 7,284
Likes: 175
From: A Pacific Island.
Drop it, weirdos....
Old 08-21-2022 | 09:07 PM
  #15  
BigCajun's Avatar
Banned
iTrader: (1)
 
Joined: Jan 2013
Posts: 6,164
Likes: 2,697
I resemble that remark.





Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TheWyvern
Series I Trouble Shooting
4
08-22-2017 02:59 PM
Johny Lee
New Member Forum
3
07-08-2016 07:46 AM
VOODOO8
Series I Trouble Shooting
21
09-24-2014 07:23 AM
HKlove
Series I Trouble Shooting
3
11-14-2012 07:06 PM
Clavius
Series I Trouble Shooting
13
09-28-2008 08:52 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 05:24 AM.