obd2 code p2109
#1
obd2 code p2109
I have an 04 rx8 I had to put new radiator hoses on my car the other day and went to start it the next morning and the traction control stayed on i had no power.I shut it off and pulled the engine fuse for it and put it right back in c.t. went off when i started it.drove it 1/4 mile to gas station and it came back on.I have the obd2 code reader but was hoping someone else excperienced this and it was something stupid any help would be appreciated.I dont want to spend hundreds on sensors if i dont have to.
#2
DTC P2109
TP sensor minimum stop range/performance problem
DETECTION CONDITION
• The PCM monitors the minimum TP when the closed TP learning is completed. If the TP is less than 11.5 % or more than 24.3 %, the PCM determines that there is a TP sensor minimum stop range/performance problem.
Diagnostic support note
• This is a continuous monitor (CCM).
• The MIL illuminates if the PCM detects the above malfunction condition in the first drive cycle.
• PENDING CODE is available if the PCM detects the above malfunction condition.
• FREEZE FRAME DATA is available.
• The DTC is stored in the PCM memory.
POSSIBLE CAUSE
• Drive-by-wire control system malfunction
• Throttle actuator malfunction
• Throttle valve malfunction
• PCM malfunction
TP sensor minimum stop range/performance problem
DETECTION CONDITION
• The PCM monitors the minimum TP when the closed TP learning is completed. If the TP is less than 11.5 % or more than 24.3 %, the PCM determines that there is a TP sensor minimum stop range/performance problem.
Diagnostic support note
• This is a continuous monitor (CCM).
• The MIL illuminates if the PCM detects the above malfunction condition in the first drive cycle.
• PENDING CODE is available if the PCM detects the above malfunction condition.
• FREEZE FRAME DATA is available.
• The DTC is stored in the PCM memory.
POSSIBLE CAUSE
• Drive-by-wire control system malfunction
• Throttle actuator malfunction
• Throttle valve malfunction
• PCM malfunction
#3
Here's a big thread on this code...
https://www.rx8club.com/series-i-trouble-shooting-95/cel-butterfly-valves-driving-pedal-position-sensor-165147/
https://www.rx8club.com/series-i-trouble-shooting-95/cel-butterfly-valves-driving-pedal-position-sensor-165147/
#4
i put my scanner on the car and am getting a reading abs tps 30%.but now its idling perfect so i sont understand whats going on with it.Ty yall for being such a big help great info.
I Took the air cleaner off the k&n filter needs cleaning.The plug from the thread Darkbrew suggested was extremly helpfulty ty for that.It was a combination while changing the radiator hoses the plug some how came loose and the throttle body had a good amount of sledge build up so i cleaned it and got a good connection on that plug she runs and idles great now the traction control light comes on and off when its supposed to and it idles down to 1000 rpm after i get on her no skipping or hesitiation.Thank you all very much for helping me solve this problem hopefully but not that hopefully i can return the favor in time ty again.This is truley what this sight is about.
I Took the air cleaner off the k&n filter needs cleaning.The plug from the thread Darkbrew suggested was extremly helpfulty ty for that.It was a combination while changing the radiator hoses the plug some how came loose and the throttle body had a good amount of sledge build up so i cleaned it and got a good connection on that plug she runs and idles great now the traction control light comes on and off when its supposed to and it idles down to 1000 rpm after i get on her no skipping or hesitiation.Thank you all very much for helping me solve this problem hopefully but not that hopefully i can return the favor in time ty again.This is truley what this sight is about.
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM
jamespond24
RX-8 Parts For Sale/Wanted
11
12-01-2015 11:11 PM
tommy26Germany
Series I Trouble Shooting
11
09-29-2015 10:33 AM