Radio won't turn on/ LCD wont light up/ AC won't work
#1
![Unhappy](https://www.rx8club.com/images/icons/icon9.gif)
Hey All,
I just got a 2005 Mazda RX8 today, and proceeded to install a ipod integration kit into the car. I unplugged the battery completely from the car before starting, and completed every step. Once everything was plugged back in, i turned the car on, but nothing shows up on the LCD no matter what buttons I press, the radio won't turn on, and the middle *** where you turn AC on or off won't light up no matter how many times I press it. The fan *** works perfectly however, and i can hear the cd player when the car is turned on. Can somebody please help me solve this problem? I spent 3 hours figuring out how to dissasemble everything properly, now my whole front console seems dead...on the first day of me having the car
I just got a 2005 Mazda RX8 today, and proceeded to install a ipod integration kit into the car. I unplugged the battery completely from the car before starting, and completed every step. Once everything was plugged back in, i turned the car on, but nothing shows up on the LCD no matter what buttons I press, the radio won't turn on, and the middle *** where you turn AC on or off won't light up no matter how many times I press it. The fan *** works perfectly however, and i can hear the cd player when the car is turned on. Can somebody please help me solve this problem? I spent 3 hours figuring out how to dissasemble everything properly, now my whole front console seems dead...on the first day of me having the car
![Icon No2](https://www.rx8club.com/images/smilies/icon_no2.gif)
#3
I will later on today. Is this a common problem after installing the ipod integration? Funny thing is when the car is on, and the ipod is plugged in, the ipod announces that the accesory isn't optimized for the ipod, and doesn't charge.
#5
Okay, I've checked all the fuses..and they're all fine. What other things could I do to fix this problem? I went through the process of removing the radio again today, and made sure all connections are good..still the same problem
Having no radio and AC absolutely sucks!
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
#6
Registered
iTrader: (3)
Join Date: Nov 2007
Location: Sac CA
Posts: 380
Likes: 0
Received 0 Likes
on
0 Posts
I second this, I had a similar or perhaps the same problem when installing an Ipod integration kit. Make sure the face of the stereo(part that wont light up) is making complete contact with the rest of the unit. When pulling out
the unit the front face may lose contact.
![Yesnod](https://www.rx8club.com/images/smilies/yesnod.gif)
#16
Registered
iTrader: (1)
Then you''ll have to pull the whole unit out (at least a little) like cfm251 suggests. The problem with the radio is, that face plate and the radio are two seperate units. The face has little connections (almost like pins) that connect directly the the radio. If the radio isn't sucured properly, it can actually side back and disconnect from the face. You'd be surprised how little movement it takes for them to loose contact. Honestly, it seems like more of a hassel then it actually is to pull the radio.
I feel your frustration tho, it took me more than 2 hours to find the problem, but only took 10 mins to fix.
I feel your frustration tho, it took me more than 2 hours to find the problem, but only took 10 mins to fix.
#19
Registered
iTrader: (1)
The same DIY http://www.whatsmyip.org/ipodrx8/1.php Page 4 shows you where the screw are. In regards to the antenna cable, I not sure. I dont remember how I got it loose. But you dont have to disconnect the radio completely from the car to check if those pins are the problem. As long as you can pull the radio out a little, you can gradb the back of the radio and push ont the face plate. Try seeing if you have power to the radio before you put everthing back together.
Aslo, with the radio pulled out, it shouldn't take much force at all to see if those pins are the problem.
Aslo, with the radio pulled out, it shouldn't take much force at all to see if those pins are the problem.
#21
Registered User
iTrader: (1)
Join Date: Sep 2006
Location: Athens,Greece
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
For the antenna cable, just tug it out.
I had the same problem when i tried to connect the auxmod. Only the a/c controls were working. It turns out that i had blown up the headunit. The lcd, cd player and faceplate, they take power from the head unit. If the head unit is blown up then all the above are not working except the a/c controls. I changed only the headunit and everything is perfect now!!
If you want more help just ask me!!
I had the same problem when i tried to connect the auxmod. Only the a/c controls were working. It turns out that i had blown up the headunit. The lcd, cd player and faceplate, they take power from the head unit. If the head unit is blown up then all the above are not working except the a/c controls. I changed only the headunit and everything is perfect now!!
If you want more help just ask me!!
#22
ok thank you all! I shall try that then. I now the head unit is probably fine because everytime i start the car, i hear as if a cd is stuck in the cd player...which brings another question o.O is it possible there is a cd jammed in there? cause i can't put in a new cd...