Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

Strange clicking noise after changing spark plugs.

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 04-02-2011 | 08:29 PM
  #1  
dhill1921's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 37
Likes: 0
From: Lawrenceville, GA
GA Strange clicking noise after changing spark plugs.

I need some help. I just finished changing all 4 spark plugs and now I am getting a clicking noise. I changed each individually so I would not mix up the trailing and leading plugs. I tried loosening the plugs a little and then tightening the plugs a little more. Still getting the same noise. I made sure evrything was tight. I am using the NGK iridium plugs. I have a 2005 6 speed, all stock.
Old 04-02-2011 | 08:32 PM
  #2  
Javon's Avatar
Registered User
 
Joined: Jul 2010
Posts: 36
Likes: 0
From: CA
It it's really fast clicking. The plug wires are probably loose
Old 04-02-2011 | 09:15 PM
  #3  
dhill1921's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 37
Likes: 0
From: Lawrenceville, GA
Thanks! I will try the wires in the morning.
Old 04-03-2011 | 03:08 PM
  #4  
dhill1921's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 37
Likes: 0
From: Lawrenceville, GA
I checked all of the plugs and the wires. Reseat all of the wires at the plugs and at the coils. I am still getting the same sound. Could it be my wires?
Old 04-03-2011 | 06:56 PM
  #5  
dhill1921's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 37
Likes: 0
From: Lawrenceville, GA
Any ideas? Anyone? I don't want to drive it if this will cause any damage to the engine.
Old 04-03-2011 | 08:47 PM
  #6  
Javon's Avatar
Registered User
 
Joined: Jul 2010
Posts: 36
Likes: 0
From: CA
How many miles on the car?
It may be your wires if your car has lots of miles. Might as well replace them. If it turns out to not be the wire then I suggest searching the forum for some who has had the same problem
Old 04-04-2011 | 08:50 AM
  #7  
dhill1921's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 37
Likes: 0
From: Lawrenceville, GA
Thanks for the reply. I just hit 66k. I am ordering the wires today. I just wanted to make sure that I owuld not be damaging my car by driving it until I can get the wires installed.
Old 04-04-2011 | 09:25 AM
  #8  
200.mph's Avatar
FULLY SEMI AUTOMATIC
iTrader: (9)
 
Joined: Aug 2008
Posts: 5,706
Likes: 2,508
From: BALLS DEEP
you might have cracked the porclin on one of the plugs. i did it before. while the car is running (better if its dark out) check to see if theres any arcing to the "block". do not grab anything down there while the car is running, if its arcing and you touch it it will hurt like a bitch. if its not the plugs the wires might not be all the way on. you should change your coils too
Old 04-06-2011 | 10:12 AM
  #9  
dhill1921's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 37
Likes: 0
From: Lawrenceville, GA
Thanks 200.mph!! I will try that as soon as I get the wires. I thought about changing the coils too but they seem to be fine.
Old 04-06-2011 | 10:14 AM
  #10  
J8635621's Avatar
Pew Pew Pew
iTrader: (10)
 
Joined: Jun 2007
Posts: 6,344
Likes: 128
From: Waco
Yea always change the coils on the car. 8s have notoriously weak coils
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kanthinar
New Member Forum
15
12-21-2015 01:24 PM
Redheddude222
New Member Forum
13
08-24-2015 09:14 AM
Rx808BI
New Member Forum
4
08-09-2015 10:06 AM
Obivious
New Member Forum
0
07-29-2015 05:57 PM
Belalnabi
New Member Forum
9
07-17-2015 07:48 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Strange clicking noise after changing spark plugs.



All times are GMT -5. The time now is 09:15 AM.