Uneven Rear Brake Pad Wear
#27
Registered
Join Date: Apr 2012
Location: hempstead, Tx
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
I don't think so. Cuz when i switched then, i thought i had the regular suspension. Until i clarified with dealer and auto zone gave me some bigger rotors and my pads are wearing down normal now. Or are we talking about pads? Lol
#28
Registered
iTrader: (25)
the same rear brake pad shape with more thickness is available for other vehicles, but they shouldn't really fit on the RX8. Found this out the hard way when I was sent a set by mistake and couldn't figure out why the piston wouldn't go in any further to let them fit over the rotor width.
#30
Registered User
Thread Starter
Is it wearing down on the outside of the pads? Is there like a little lip on it? Cuz from the pic, isee the rotor a bit small if it's the sports package. I ran into the same problem when i got mine, i changed the pads and it was uneven wear, turned out the previous owner didn't want to spend a few extra bucks to get the right rotor. Might check that out as well.
#31
Registered
Join Date: Apr 2012
Location: hempstead, Tx
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
#34
Registered
Join Date: Apr 2012
Location: hempstead, Tx
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
I found the pics of how different the two rotors are. The bottom one is the correct rotor for my car. The top one is the wrong one. Do your rotors look like the top one?
#35
Registered
iTrader: (25)
The front brakes are a different size, not the rear
https://www.rx8club.com/wheels-tires...ke-faq-167264/
If your rear rotors were wrong it's because they were for a different car
.
https://www.rx8club.com/wheels-tires...ke-faq-167264/
If your rear rotors were wrong it's because they were for a different car
.
Last edited by TeamRX8; 03-12-2013 at 08:43 PM.
#39
Hello
Today I had my car's brake pads and disks replaced. All are EBC brand. Having driven for about 100km, it looks like that:
I noticed the wear didn't occupy the whole braking surface of the disk. It looks, about 20% area to the inner side didn't wear. Is that normal?
Here's a better resolution picture:
Today I had my car's brake pads and disks replaced. All are EBC brand. Having driven for about 100km, it looks like that:
I noticed the wear didn't occupy the whole braking surface of the disk. It looks, about 20% area to the inner side didn't wear. Is that normal?
Here's a better resolution picture:
Last edited by revivo73; 03-14-2013 at 11:22 AM. Reason: added picture
Thread
Thread Starter
Forum
Replies
Last Post
jay_tibo
Series I Aftermarket Performance Modifications
22
09-13-2016 08:10 PM
Touge
Canada Forum
3
09-10-2015 08:07 AM
nivong
Europe For Sale/Wanted
0
09-02-2015 07:54 AM