Wyrelade

Sup gang. Long time no see.

Last time I posted about my engine that I rebuilt and thanks for all of you I got that engine and car working last summer. Been driving the 8 for a year now and this is the first time something seems to be off after that rebuild.

Idle is very shaky when warm. When the idle hits that 800-700rpm mark it feels bit like jumping. Car drives VERY good tho and feels quick and no issues. Starts warm and cold and no flooding or "bad compression issues" as far as I know.

Ill post a vid here what it sounds like and if anyone has had similar experience please let me know what you did to fix this. ( The car is decat and cat is empty so it might sound different than some of you but the burble or popping sound idle is a new thing ).


The issue: Burbly idle, also kinda jumps up and down the whole car. if I bring the rpm up to 900-1100 or so everything is fine. Car drives and handles perfectly, accelerates well and starts warm and cold and even if I turn it on and off instantly many times there is no chance it floods.



Outside idle and gas pressin n stuff

brakel3ss

Posting to keep an eye on this thread. Mine does the same after a recent motor swap. Pretty much exact same symptoms. So far ive made sure: coils, plugs, and wires are all new; MAF is a known good unit; oil is not overfilled; air filter is clean; im getting no codes, which is weird since i have an air pump delete; gas is fresh. Sill hunting the cause of this idle issue