19x9.5 + 19x10.5 Volk GT-Vs
#1
zoom.zoom
Thread Starter
Join Date: Apr 2005
Location: jkt.
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
19x9.5 + 19x10.5 Volk GT-Vs
19x9.5 with 245/35/19 and 19x10.5 with 275/30/19 Toyo CT-01.
Tein Type Flex coilovers set to lowest.
Took at least 4 hours to fit them without hitting the fenders or the inside walls.
Teaser pic until I take better pictures with better camera.
Tein Type Flex coilovers set to lowest.
Took at least 4 hours to fit them without hitting the fenders or the inside walls.
Teaser pic until I take better pictures with better camera.
Last edited by ray_7; 05-07-2005 at 08:55 PM.
#4
zoom.zoom
Thread Starter
Join Date: Apr 2005
Location: jkt.
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
by 'thinning' the fenders.
you know those rubbers inside the fenders that's suppose to cover the back part of the walls? those are gone... rolled the fender lips to the max... also knocks the fenders around .5cm... negative cambers so it doesn't come out too far and make the wheels like this / \
more pics will come later tonight.
you know those rubbers inside the fenders that's suppose to cover the back part of the walls? those are gone... rolled the fender lips to the max... also knocks the fenders around .5cm... negative cambers so it doesn't come out too far and make the wheels like this / \
more pics will come later tonight.
#12
zoom.zoom
Thread Starter
Join Date: Apr 2005
Location: jkt.
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
@djrx8:
yup it is great to drive infact! shud be the teins... =)
@canaryrx8:
at first they did rub after i rolled the fenders and removed those rubber thingy in the inside walls, then we went on to thin the fender even more... removing screws and more rubbers!!!
@bluebandit05:
if i go straight on and with speed i *think* it will hit the fenders, but of course i'm not dumb enough to do that. i always take bumps at angles.
yup it is great to drive infact! shud be the teins... =)
@canaryrx8:
at first they did rub after i rolled the fenders and removed those rubber thingy in the inside walls, then we went on to thin the fender even more... removing screws and more rubbers!!!
@bluebandit05:
if i go straight on and with speed i *think* it will hit the fenders, but of course i'm not dumb enough to do that. i always take bumps at angles.
#18
zoom.zoom
Thread Starter
Join Date: Apr 2005
Location: jkt.
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
@izoomzoom1:
yes, that's a 6series...![Wink](https://www.rx8club.com/images/smilies/wink.gif)
@xero:
my front doesn't rub at all...
ok, as promised, here are some more pictures taken at various angles. couldn't find my trusted digicam, so just went on and used my handycam.
yes, that's a 6series...
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
@xero:
my front doesn't rub at all...
ok, as promised, here are some more pictures taken at various angles. couldn't find my trusted digicam, so just went on and used my handycam.
Last edited by ray_7; 05-08-2005 at 10:50 PM.
#22
Hmmm I guess 70's style is coming back.
You need to get some 17" Cragars, jack the rear up, and make sure you've got tires with white lettering (Hoosiers or Mickey Thompsons) sticking way out. Mud flaps too.
You need to get some 17" Cragars, jack the rear up, and make sure you've got tires with white lettering (Hoosiers or Mickey Thompsons) sticking way out. Mud flaps too.
Last edited by BaronVonBigmeat; 05-08-2005 at 10:24 PM.