Adjustable endlinks - adjustment question
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: Dec 2007
Location: Cleveland
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Adjustable endlinks - adjustment question
I bought and installed the Agency Power adjustatble front endlinks. The factory ones failed and the upgraded TSB ones failed as well.
What is the proper way to adjust the endlink length so it is correct in relationship to the sways and RB lowering springs? Thanks.
What is the proper way to adjust the endlink length so it is correct in relationship to the sways and RB lowering springs? Thanks.
#2
Former Sponsor
iTrader: (64)
In Relation to the Front Sway Bar you want to keep the bar Horizontal(Completely level with the Ground, so adjusting the bolts height so that depending on your ride height making it shorter in length to pull the bar to a horizontal position.
Let me know if that helps or have any other questions.
Upgraded TSB?..
Let me know if that helps or have any other questions.
Upgraded TSB?..
#7
悪魔のR
iTrader: (12)
Join Date: Jan 2008
Location: Boston
Posts: 1,528
Likes: 0
Received 0 Likes
on
0 Posts
I got a better question Ray.. :x Using the adjustable endlinks..how do you get the rear to be horizontal with the rear auto-level sensor in the way? If it wasn't, I'd have no problem...but seems to be causing me some grief.
#9
Shouldn't you be asking the one who sold the links to you? They oughta know.
#11
No I don't.
#13
#14
The word I was looking for was "pre-load".
Further, before anybody thinks I am getting personal with Brice/Fluid please understand that I am trying to encourage all of we vendors to engage in technical discussion so those who read these conversations can see what their favorite vendors' opinons are (on a strictly technical level) and decide the theory or theories with which they are most comfortable. Nobody on the BHR team is arrogant enough to actually think we know everything and we certainly enjoy the opportunity to share ideas and learn something in the process. And maybe have a little healthy competition in the process as we are more concerned with the end benefit to the market more than anything else. The current vendor rules quash these opportunities.
Last edited by Charles R. Hill; 02-23-2009 at 08:31 PM.
#16
#17
Registered
iTrader: (2)
The purpose of a sway bar is to keep the "loaded" side of the car even with the "unloaded" side of the car in a turn. So all it's technically doing is flexing itself.
This is the purpose of a larger sway bar. To not flex as much. As far as the endlink position it is all relative to the opposite side of the sway bar.
Now if the sway bar was fixed to the frame and not able to rotate in the mounting brackets then height would be an issue.
Just be sure to make sure they are at the same height on both sides.
But the sway bar does not deal with the mounting points as much as it deals with rotational flex and even height of the endlinks.
This is the purpose of a larger sway bar. To not flex as much. As far as the endlink position it is all relative to the opposite side of the sway bar.
Now if the sway bar was fixed to the frame and not able to rotate in the mounting brackets then height would be an issue.
Just be sure to make sure they are at the same height on both sides.
But the sway bar does not deal with the mounting points as much as it deals with rotational flex and even height of the endlinks.
#18
I don't buy Kool-Aid
Even with the autolevel sensor in the way I use a short alenwrench on the end of a socket wrench to hold it from spinning and used a long 17" box end wrench to tourqe it the bolts down. Works for me.
But keep an eye on the bolts as they tend to come lose over time.
-Gil
#19
The purpose of a sway bar is to keep the "loaded" side of the car even with the "unloaded" side of the car in a turn. So all it's technically doing is flexing itself.
This is the purpose of a larger sway bar. To not flex as much. As far as the endlink position it is all relative to the opposite side of the sway bar.
Now if the sway bar was fixed to the frame and not able to rotate in the mounting brackets then height would be an issue.
Just be sure to make sure they are at the same height on both sides.
But the sway bar does not deal with the mounting points as much as it deals with rotational flex and even height of the endlinks.
This is the purpose of a larger sway bar. To not flex as much. As far as the endlink position it is all relative to the opposite side of the sway bar.
Now if the sway bar was fixed to the frame and not able to rotate in the mounting brackets then height would be an issue.
Just be sure to make sure they are at the same height on both sides.
But the sway bar does not deal with the mounting points as much as it deals with rotational flex and even height of the endlinks.
And herein lies a HUGE secret to what makes BHR the best........
Last edited by Charles R. Hill; 02-23-2009 at 08:53 PM.
#20
Mine is set up the same way. I have my ap endlink set to the stiff position that means its in the hole close to the bar. From the sounds of it. Yours is the same way. My car is lowered on tanabe gf210 springs. So there is really no way for me to set the bar straight. Trust me that sucker is on there tight.
Even with the autolevel sensor in the way I use a short alenwrench on the end of a socket wrench to hold it from spinning and used a long 17" box end wrench to tourqe it the bolts down. Works for me.
But keep an eye on the bolts as they tend to come lose over time.
-Gil
Even with the autolevel sensor in the way I use a short alenwrench on the end of a socket wrench to hold it from spinning and used a long 17" box end wrench to tourqe it the bolts down. Works for me.
But keep an eye on the bolts as they tend to come lose over time.
-Gil
#21
Registered
iTrader: (2)
Here is the curious thing about swaybars and adjustable end-links; swaybars such as the Progress Techs for the front of the RX-8 have 3 holes on each side and are considered "5-way" adjustable. Why might that be?
And herein lies a HUGE secret to what makes BHR the best........
And herein lies a HUGE secret to what makes BHR the best........
The closer in the setting to the front of the bar the more stiff the bar becomes. The farther out the mounting point (end of sway bar end link mount) will make the bar more flexible.
#23
I don't buy Kool-Aid