Aggressive Wheel Fitment Thread
![mike[piston eater]'s Avatar](https://www.rx8club.com/avatars/mike%5Bpiston-eater%5D-48728.gif?dateline=1334247180)
![mike[piston eater] is offline](https://www.rx8club.com/images/statusicon/user_offline.gif)
09-03-2010, 12:14 PM
#3353
Registered User
Join Date: Sep 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hello guys
first of all, sorry for my bad english, im form switzerland
i could buy some work wheels very cheap from a guy who drove the wheels on a 350z.
Work Euroline XS2
Front: 19x9 +10
Rear: 10x10 +10
can anyone say me if this fits? i am on springs!
do i have to roll fenders?
do i have to pull fenders? if yes, how much?
do i have to put camber arms and toebolts? (if im sincerly, i dont wanna put that, its not allowed here in switzerland)
what wheel-specs should i go for?
sorry for those many questions, i need help as soon as possible...
the guy dont sell the wheels to me if i dont give him an answhere till tomorrow...
thx for your feedback guys!
cheers,
luca
first of all, sorry for my bad english, im form switzerland
i could buy some work wheels very cheap from a guy who drove the wheels on a 350z.
Work Euroline XS2
Front: 19x9 +10
Rear: 10x10 +10
can anyone say me if this fits? i am on springs!
do i have to roll fenders?
do i have to pull fenders? if yes, how much?
do i have to put camber arms and toebolts? (if im sincerly, i dont wanna put that, its not allowed here in switzerland)
what wheel-specs should i go for?
sorry for those many questions, i need help as soon as possible...
the guy dont sell the wheels to me if i dont give him an answhere till tomorrow...
thx for your feedback guys!
cheers,
luca
09-03-2010, 09:48 PM
#3354
Hello guys
first of all, sorry for my bad english, im form switzerland
i could buy some work wheels very cheap from a guy who drove the wheels on a 350z.
Work Euroline XS2
Front: 19x9 +10
Rear: 10x10 +10
can anyone say me if this fits? i am on springs!
do i have to roll fenders?
do i have to pull fenders? if yes, how much?
do i have to put camber arms and toebolts? (if im sincerly, i dont wanna put that, its not allowed here in switzerland)
what wheel-specs should i go for?
sorry for those many questions, i need help as soon as possible...
the guy dont sell the wheels to me if i dont give him an answhere till tomorrow...
thx for your feedback guys!
cheers,
luca
first of all, sorry for my bad english, im form switzerland
i could buy some work wheels very cheap from a guy who drove the wheels on a 350z.
Work Euroline XS2
Front: 19x9 +10
Rear: 10x10 +10
can anyone say me if this fits? i am on springs!
do i have to roll fenders?
do i have to pull fenders? if yes, how much?
do i have to put camber arms and toebolts? (if im sincerly, i dont wanna put that, its not allowed here in switzerland)
what wheel-specs should i go for?
sorry for those many questions, i need help as soon as possible...
the guy dont sell the wheels to me if i dont give him an answhere till tomorrow...
thx for your feedback guys!
cheers,
luca
How much you pull your fenders in my opinion is how much camber you want to run. What size tires and what springs are you on?
09-03-2010, 09:59 PM
#3355
You are going to have to deal with about 25mm of fitment issues...
!8X9.5 +45 fit without anything with 275/35 series tires
18X9.5 +35 need a roll with 275/35 Fit with 255 or smaller tires usually
Anything smaller offset than that you have to deal with that extra in camber,pulling..or running stretched tires....none of which are the best
So basically that leaves you with about 25mm of problems to make them fit
From my definition they don't fit...but there are others that will disagree
The 19in rims tend to give you less options with the tires to make them fit.....
!8X9.5 +45 fit without anything with 275/35 series tires
18X9.5 +35 need a roll with 275/35 Fit with 255 or smaller tires usually
Anything smaller offset than that you have to deal with that extra in camber,pulling..or running stretched tires....none of which are the best
So basically that leaves you with about 25mm of problems to make them fit
From my definition they don't fit...but there are others that will disagree
The 19in rims tend to give you less options with the tires to make them fit.....
09-04-2010, 02:43 PM
#3357
OMGITM!
Thread Starter
iTrader: (15)
Join Date: Jan 2006
Location: Sunny Southern California
Posts: 3,513
Likes: 0
Received 6 Likes
on
6 Posts
Nice stuff! Just a bit lower and it'll be perfect 
I'd have to agree; for all intensive purposes, those wheels don't fit. Certainly, you can make them fit but this requires quite a bit of work. Also, on springs, I wouldn't exactly recommend this type of fitment. Typically, to pull off aggressive specs, cars have to be very (too) low to make the aesthetics work.
Will it fit? No.
Can it fit? Technically, yes...
Will it fit? No.
Can it fit? Technically, yes...
looks great man i hope you keep em
09-13-2010, 11:27 PM
#3367
09-13-2010, 11:45 PM
#3370
OMGITM!
Thread Starter
iTrader: (15)
Join Date: Jan 2006
Location: Sunny Southern California
Posts: 3,513
Likes: 0
Received 6 Likes
on
6 Posts
No! Pics now! This is www.rx8picwhoreclub.com!
09-15-2010, 01:42 AM
#3373
OMGITM!
Thread Starter
iTrader: (15)
Join Date: Jan 2006
Location: Sunny Southern California
Posts: 3,513
Likes: 0
Received 6 Likes
on
6 Posts
Excellent photos with on par fitment. It's always fun to see some JDM bling on the RX8, Jonathan Ray's photos make it easy to overlook the vinyl wrap/MB's/etc. I think we've seen the car posted here a few times but anyways, to the owner Sean, keep it up man the car looks great! Heh, really makes me want to invest in a flash setup before getting anything more for the 8!
More shots + story can be seen at Stance:Nation or here -> http://jonathan-ray.com/blog/index.p...-stancenation/
More shots + story can be seen at Stance:Nation or here -> http://jonathan-ray.com/blog/index.p...-stancenation/
Last edited by tiltmode43; 09-15-2010 at 05:03 AM.
