tiltmode43

iTrader: (15)

This is where problems start. It is not a plug-and-play setup, fender modification is needed. I don't know why Ross said there were no problems at all...

J8635621

iTrader: (10)

u.costa: https://www.rx8club.com/showpost.php...postcount=1905 There is some stuff he did to make it fit. May not need as much since it seems like you aren't anywhere close to as low as him.

PS: I like where your sig is going Tilt.

tiltmode43

iTrader: (15)

+1 for the link, it always helps to see what other members go through to make a certain setup fit, or not fit!

As for the sig... :D





The wheels are Volk CE28n Genesis in 18x9.5 +22. I've got some 5mm spacers in the back, now just waiting for some more for the front. 255/35/18 toyo R1r's and I may be stepping to 265's for my next set.

The color on these wheels is interesting, it almost changes between bronze and grayish silver, all depending on the lighting/shadows. I included the middle picture to show this. I've never had ce's and can now finally add it to the list! I've heard every dirty-car comment on earth so if that's all you've got to say you can hold your tongue :P

thejew89

those wheels looks sick tilt

ZachLegend

tilt, my dad came home last night and was like "i was this white 8 that was slammed as hell with its wheels halfway out the fenders" I immediately responded, "tiltmode"

ahahah keep it up!

J8635621

iTrader: (10)

Loving the fingerprints on the front bumper lol.

u.costa

Even though if i got adjustable coil overs i will have problems?

u.costa

Thanks man!! In case i have any problems i shall try that.

Thanks

Ross_Dawg

iTrader: (2)

Sorry for the confusion u.costa; I was referring to the wheels not being "aggressive". I had assumed you've read this thread and seen what work it will take for the 17x10 +25 to fit (which is "aggressive"). Have you? If you're not willing to roll all your fenders and pull a little bit you should go with your original order of 9.0 +35.

It will look very aggressive but remember it will need work, you cant just drive around like that out of the box.

Again, sorry for the confusion; was referring to the aggressiveness of the wheels, not the fitment.

You will still need to roll all your fenders but the c'overs will help you get the stance you want.

If you still havent read this thread, contact TRex8 as he had that exact setup and can tell you what you need to do to make it work.

alexisthemovie

YES! I got some 18x13, 18x11 Meisters, let's try your car if it doesn't fit my S. :P

tiltmode43

iTrader: (15)

Sweet man, I'll be in town next weekend. I saw a glimpse of those pics of your fenders on facebook, hopefully you can tuck them up there!

u.costa - You can make that spec work, it will just take a little bit of work. Also, the ride height adjustability of a coilover isn't what I was referring to exactly. I would probably try PMing imput as he's posted much more on making that spec work out. Those wheels look very nice in that spec because of the concave, the 9" +35 is very boring!

Thanks thejew!

Lol Zach that's awesome!

TopGear8

iTrader: (3)

Lookin great tilt, the CE's are definitally one of my favorite wheels. Good choice.

alexisthemovie

Damnit I'm gonna be in japan lol. Those CE's are your best set yet.

initialsin

iTrader: (1)

hey tilt, those look a lot better now that i see them in th light instead of the parking structure. wish i bought them before you did, jk looks really good. nice meeting you

u.costa

It will look very aggressive but remember it will need work, you cant just drive around like that out of the box.



You will still need to roll all your fenders but the c'overs will help you get the stance you want.

If you still havent read this thread, contact TRex8 as he had that exact setup and can tell you what you need to do to make it work.[/QUOTE]

Ok thanks. But the original set, the 17x9 +35mm doesnt look as bad *** as that one right?
I read that thread and i dont have the tools like imput has. And i dont know how to do that, but ill show that thread to the ppl at the shop and ask if they can do that. I dont want to lose my side markers though.

I will as well contact T-Rex as soon as possible cuz the wheels will arrive next week.
So u think as soon as the wheels and tires are installed in the car i wont be able to drive well right away? the fender mod is needed right away??

PS: Sorry for so many questions...i'm not american neither understand very well these things but im doing wat i can.

u.costa

Thanks tiltmode43! I thought that as well about the 9" +35

T-ReX-8

iTrader: (1)

PM me what you exactly need to know and I'll let you know step by step. Its not really "hard" just can't be scared to cut and grind on a relatively new car

RickA

iTrader: (2)

So it appears I've "bent" (read: fucked up) some metal on the underside of my car... I'm not sure when I did it so I don't know how it happened, but I noticed it last week when I looked beneath the car to see if all the speed bump and ramp scraping had ripped anything off, dented anything, broke ****, etc...

Because of my awesome work hours (read: shitty) I won't have time to jack it up to really take a look at the damage for a few weeks, but I found these pics of the interface I'm referring to (the bent metal is circled in red). They connect to the lower control arms. The forward-most part is bent straight down, but the area around the toe-adjusting bolt seems to be unaffected. I'm worried though that hitting the metal enough times is going to really **** something up while I'm going down the interstate. Anyone have any input?

marky702

thanks guys! im still workin on the stance. im trying to get it lower

sick set up once again tilt

RickA

iTrader: (2)

Dude...


your car


it's


ummm...


how do I say this?


it has dirt on it

u.costa

Can anybody explain me this term "tilt". I know it has to do with something bent, now how or why the wheels are bent? My bad for my ignorance..

mike[piston eater]

iTrader: (3)

tilt is his screne name, but i think your talking about concave wheels?

9krpmrx8

iTrader: (46)

tiltmode43

iTrader: (15)

tiltmode43 -> "tilt" in short

I hope it doesn't have to do with anything being bent

Those vsxx look good

RickA

iTrader: (2)

I love the color combo of the blue lugs and red valve stem cap... nice little details