Anyone Replaced their brake pads?
#1
Anyone Replaced their brake pads?
I need to replace My front pads as there is a high pitched squeel when the brakes are first applied.
Question: Can anyone advise me on the best make? ie EBC, Hawk, Centric...ect? I'd also like to go with drilled and slotted rotor eventually so I'll appreciate any advise on them too!
Thanks,
ice
Question: Can anyone advise me on the best make? ie EBC, Hawk, Centric...ect? I'd also like to go with drilled and slotted rotor eventually so I'll appreciate any advise on them too!
Thanks,
ice
#6
depends on where you buy the rotors from. cheap ebay stuff can easily crack during track use.
i like the hawk ceramic pads, got them from tirerack for about 140 shipped for all 4, no noise, low dust.
i like the hawk ceramic pads, got them from tirerack for about 140 shipped for all 4, no noise, low dust.
#7
Registered
Join Date: May 2006
Location: Chicago Il.
Posts: 1,040
Likes: 0
Received 0 Likes
on
0 Posts
There's TBS on this matter [ RX8 Service Bulletin ] . Go to finish Line Web there is something in regards to squeal noise during braking. If you take it to them with that print out they should take care of it for you.
If you do a search you will notice you're not the only one with this matter.
If you do a search you will notice you're not the only one with this matter.
#9
Registered User
iTrader: (5)
Join Date: Oct 2005
Location: Bethesda, MD
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
There's TBS on this matter [ RX8 Service Bulletin ] . Go to finish Line Web there is something in regards to squeal noise during braking. If you take it to them with that print out they should take care of it for you.
If you do a search you will notice you're not the only one with this matter.
If you do a search you will notice you're not the only one with this matter.
#11
jersey fresh
Join Date: Dec 2005
Location: Boston, MA
Posts: 3,688
Likes: 0
Received 0 Likes
on
0 Posts
Oh and cross drilled rotors are fine, that guy is just trying to show off his track knowledge. If you're just a normal street cruiser like most of us then drilled rotors will be perfectly fine (just get them from the proper place, like one of the forum vendors of this site.)
#17
Registered
Join Date: May 2006
Location: Chicago Il.
Posts: 1,040
Likes: 0
Received 0 Likes
on
0 Posts
I would give it a try . Take in the TSB and tell them you've had this issue for quite sometime, that you feel this is the reason for your squealing brakes. You have nothing to loose.
#22
I didn't like my EBC reds that I had, they had good initial bite but they lasted a little longer than 1500 miles, that's inclusive of two LAPPING days, they would have lasted probably one Solo 1 event had I been competing. I can vouch for Project Mu's Taitan Kai pads and Hawk HP+, Project Mu had the longest life and is really quiet, whereas after the first solo event on HP+, they squeeled loud but their life seems really good, I didn't put a dent into them.
#25
Power!!
No they won't dismiss it. They have a TSB for it and a replacement brake pad part number.