CALLING all d-spec owners
#1
04 NORDIC GREEN RX8
Thread Starter
iTrader: (3)
Join Date: Aug 2009
Location: brentwood tn
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
CALLING all d-spec owners
ok so a buddy of mine got some d-spes struts. i am buying some soon as well. anyway, we installed his last night and he had the extension cables. how do these goin the car? we pu them on before installing but there was nowhere for them to fold out or go to with out damaging the cables. anyone got any pics/ tips on how to get these things in? it seems a bit impossable.
#2
What am I doing here?
Join Date: Mar 2006
Location: 2017 Miata RF Launch Edition
Posts: 3,606
Received 649 Likes
on
510 Posts
There are holes in the upper shock mount that you can pass the cables through. The cables will have to bend pretty sharply to make it through but it works. The holes face the rear of the car.
I'll try and snap some pictures of my setup tomorrow after class.
Be careful when you are raising the shock up into position. If you lower it at any point in the process (slips, arm gets tired, trying for a different angle after corkscrewing it up, etc) with the cables attached they can catch on the various edges of the shock mount and the cables can break (the threaded end is attached with a compression fitting and the cable just pulls right out).
I'll try and snap some pictures of my setup tomorrow after class.
Be careful when you are raising the shock up into position. If you lower it at any point in the process (slips, arm gets tired, trying for a different angle after corkscrewing it up, etc) with the cables attached they can catch on the various edges of the shock mount and the cables can break (the threaded end is attached with a compression fitting and the cable just pulls right out).
Last edited by NotAPreppie; 01-09-2011 at 10:54 PM.
#3
What am I doing here?
Join Date: Mar 2006
Location: 2017 Miata RF Launch Edition
Posts: 3,606
Received 649 Likes
on
510 Posts
Sorry, didn't get out to the garage to take the pictures today.
However, I did find this:
http://www.swankmonkey.com/mazda/rx8...djustment.html
http://www.swankmonkey.com/mig/index...r=./jic_remote
They ghetto-fabbed their own adjusters but it looks like they used the same route through the body that I did.
The hole the cable (their fuel line tubing) comes out of is one of the spots that the adjuster **** gets caught when you lower the shock down. If you ever remove the shocks, have a helper handy to make certain that you don't break the adjuster.
However, I did find this:
http://www.swankmonkey.com/mazda/rx8...djustment.html
http://www.swankmonkey.com/mig/index...r=./jic_remote
They ghetto-fabbed their own adjusters but it looks like they used the same route through the body that I did.
The hole the cable (their fuel line tubing) comes out of is one of the spots that the adjuster **** gets caught when you lower the shock down. If you ever remove the shocks, have a helper handy to make certain that you don't break the adjuster.
#7
Filth in a world of Clean
iTrader: (2)
Join Date: Mar 2010
Location: Somewhere in 3rd gear
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
My set up looks really clean, granted we did this with another build in mind as well, but I am quite happy with them. I gotta do some work on the car tom. anyway.
Thread
Thread Starter
Forum
Replies
Last Post
LMURailsplitter02
New Member Forum
1
09-06-2015 10:56 PM