Calling all Forgestar F14's
#276
The forgestar be with you
Thread Starter
Join Date: Jan 2006
Location: Miami, Florida
Posts: 1,237
Likes: 0
Received 0 Likes
on
0 Posts
Who mounts the wheels and tires is not as important as how much more would it cost in either scenerio. In other words if its cheaper for it to be shipped directly to you then do it. Chances are it will be because you will have to pay for shipping again once Autoglitz is done mounting them to then ship both items to you.
#277
Ricer
iTrader: (1)
Join Date: Dec 2010
Location: Spokane, WA/ Osan ab, Korea
Posts: 248
Likes: 0
Received 1 Like
on
1 Post
Who mounts the wheels and tires is not as important as how much more would it cost in either scenerio. In other words if its cheaper for it to be shipped directly to you then do it. Chances are it will be because you will have to pay for shipping again once Autoglitz is done mounting them to then ship both items to you.
#279
The forgestar be with you
Thread Starter
Join Date: Jan 2006
Location: Miami, Florida
Posts: 1,237
Likes: 0
Received 0 Likes
on
0 Posts
#281
The forgestar be with you
Thread Starter
Join Date: Jan 2006
Location: Miami, Florida
Posts: 1,237
Likes: 0
Received 0 Likes
on
0 Posts
#283
Registered User
Join Date: Mar 2009
Location: Adelaide, Australia
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
I'm the only person with F14 in South Australia!! and quite possibly the only Titanium Grey RX8 and Gunmetal F14 in whole of Australia
#286
The forgestar be with you
Thread Starter
Join Date: Jan 2006
Location: Miami, Florida
Posts: 1,237
Likes: 0
Received 0 Likes
on
0 Posts
#287
I have 255/40/18's to put on, now I am wondering whether to go with +5mm or +10mm in the rear? What do you guys think? Will a +32 work with a -1.9 rear camber? Anybody try spacers with their +42's yet?
#288
Lucky #33
iTrader: (4)
why run the 255/40s? a bit tall. You should have no issues with rubbing using 5mm spacers unless you are lower then 13"s from center rim to lower fender.
#289
I did it because of a bodykit. I like the way Vlaze and thejew89's cars' look with the 255/40 on a 18X10, albeit, they are running high 20's offset and a lot more camber. I really like my current alignment and don't won't to adjust my camber any more. I am pretty confident that +37 will be fine in the rear, but since my rears are folded up like an envelope and the bumper tab is gone, I am trying to see what I can get away with, and curious to see what this combo looks like at +32 My 285's will be up for grabs btw, when I get my 255's on if your interested.
#297
The forgestar be with you
Thread Starter
Join Date: Jan 2006
Location: Miami, Florida
Posts: 1,237
Likes: 0
Received 0 Likes
on
0 Posts
#298
OK guys in the near future I will be putting on my 255/40/18 Toyo T1R's. Do you guys think it will be sunk in really far? I am hoping with the concave rim it won't look too bad at +42 with the 18X10.
I took the advice of Vlaze and his setup because of the Tsunami kit. I am going to run a similar body kit and have the crap roads and hills to deal with.
When Vlaze first put on his rims he was at 26 1/2" rear and 26" front (see picture). I am currently at 25 15/16" rear and 26" front. I am unsure of his camber specs in the photo. I do know that he has a +28 offset but I have the +42.
As a side note I will be installing D-specs as well, which may drop it a little more.
My camber is -1.9 rear and -1.6 front, and my rears are rolled and shaved. I am thinking I may have to space this thing out at least 5mm or maybe 10mm in the rear.
What do you guys think?
I took the advice of Vlaze and his setup because of the Tsunami kit. I am going to run a similar body kit and have the crap roads and hills to deal with.
When Vlaze first put on his rims he was at 26 1/2" rear and 26" front (see picture). I am currently at 25 15/16" rear and 26" front. I am unsure of his camber specs in the photo. I do know that he has a +28 offset but I have the +42.
As a side note I will be installing D-specs as well, which may drop it a little more.
My camber is -1.9 rear and -1.6 front, and my rears are rolled and shaved. I am thinking I may have to space this thing out at least 5mm or maybe 10mm in the rear.
What do you guys think?