Calling all RAYS wheel owners
#1001
Pettit fangurl <3
Join Date: Mar 2005
Location: Aston, PA
Posts: 5,386
Likes: 0
Received 0 Likes
on
0 Posts
^^
let me check on that guys...i forget..
its acutally 4 separate pieces...
it comes from a company that specializes in all kinds of badges.
i'll look for the website
let me check on that guys...i forget..
its acutally 4 separate pieces...
it comes from a company that specializes in all kinds of badges.
i'll look for the website
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#1003
If you went with 18x8.5's you could still stretch the stock tires on. 19x8.5 +38 all around is what I have. Flush with the fenders but no rubbing. My 245/35 tires are fairly close to the stock diameter; just a little bit taller. However, the GTS/SF wheels are both blingy wheels that don't really look good unless they're big and wide with low offsets. Drop the front instead of raising the rear if you're going for some kind of dragster look.
Thanks Whitehot. Man ya'll are great! I am super excited to get this project started. Have upholstery and paint mods in mind, a certain kit, which will remain nameless at this time, the SF wheels are a for sure now...I have kei-office eyelids installed, and a few minor mods. Nothing to the engine, will be done, except some graphics to the entire set up of covers. I just dont need a cold air intake, but have thought about changing the exhaust. I just haven't found the right 'throat" I'm looking for yet!
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
![Big Grin](https://www.rx8club.com/images/smilies/biggrin.gif)
Last edited by rddragoness; 04-20-2008 at 03:28 PM.
#1007
I got a question to all the fellow RAYS wheel owners, I would like to know where is the best place to purchase some?! To be specific, I'd like to buy some SF Challenge's in RMC finish..
#1008
Registered
Join Date: Aug 2006
Location: Columbia, MD
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
To be honest, I don't think the SF challenge would look good in chrome. Go with gold. I think gold on a VR would look even better. Keep in mind that you would have to wait for several months for your Volks to come in. imdanomite is selling his right now:
https://www.rx8club.com/rx-8-parts-sale-wanted-44/gi-19-volk-racing-sf-challenge-gold-144290/
https://www.rx8club.com/rx-8-parts-sale-wanted-44/gi-19-volk-racing-sf-challenge-gold-144290/
#1009
To be honest, I don't think the SF challenge would look good in chrome. Go with gold. I think gold on a VR would look even better. Keep in mind that you would have to wait for several months for your Volks to come in. imdanomite is selling his right now:
https://www.rx8club.com/showthread.php?t=144290
https://www.rx8club.com/showthread.php?t=144290
#1010
Pettit fangurl <3
Join Date: Mar 2005
Location: Aston, PA
Posts: 5,386
Likes: 0
Received 0 Likes
on
0 Posts
tell them i sent you...
excellent customer service....
i can tell you that any 2 or 3 piece rim will take approx 3months ETA..since they are custom...
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#1011
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#1013
the bukkake master!
#1014
There's always me. www.autornd.com
Forum Vendor and acknowledged Rotary wheel fitment guru. hehe.
Plus i'm about to start a Ray's GB since i just finished up the Enkei ones.
Rishie
Forum Vendor and acknowledged Rotary wheel fitment guru. hehe.
Plus i'm about to start a Ray's GB since i just finished up the Enkei ones.
Rishie
#1018
Registered
iTrader: (6)
Join Date: Jun 2007
Location: Pleasanton, CA
Posts: 1,781
Likes: 0
Received 0 Likes
on
0 Posts
Hey Guys after nearly 2 months of waiting, I have received confirmation that my wheels are finally coming some time next week. I will post pics once they are mounted. What cleaning tools do you guys use to clean your Volks? Now that I spent so much on wheels, I don't want to scratch them up. I know about waxing them and using microfiber towels, but any other suggestions would be greatly appreciated. Thanks.
#1019
LAZI (rx8 vendor) or his AIM (drivelinesam). boy can get you anything you want!! very honest and i have ordered my works from him.
daniel desmond (sales@desmondperformance.com) has helped me from the beginning since the first day i purchased my 8.
#1020
Official Post Whore
iTrader: (2)
Hey Guys after nearly 2 months of waiting, I have received confirmation that my wheels are finally coming some time next week. I will post pics once they are mounted. What cleaning tools do you guys use to clean your Volks? Now that I spent so much on wheels, I don't want to scratch them up. I know about waxing them and using microfiber towels, but any other suggestions would be greatly appreciated. Thanks.
#1022
#1023
Scuderia
iTrader: (6)
Join Date: Jan 2005
Location: Buckeye Country
Posts: 1,955
Likes: 0
Received 0 Likes
on
0 Posts
Hey Guys after nearly 2 months of waiting, I have received confirmation that my wheels are finally coming some time next week. I will post pics once they are mounted. What cleaning tools do you guys use to clean your Volks? Now that I spent so much on wheels, I don't want to scratch them up. I know about waxing them and using microfiber towels, but any other suggestions would be greatly appreciated. Thanks.
![Banghead](https://www.rx8club.com/images/smilies/banghead.gif)
Currently running on my track set-up, Rays Gram Lights 57F:
![](http://i32.photobucket.com/albums/d27/rax8/DSC02621.jpg)
![](http://i32.photobucket.com/albums/d27/rax8/DSC02625.jpg)