New Wheels
The wheels came in today and the lugs so I was able to get them in the shop ASAP. I left work for this but I'm glad I did because they weren't going to drop this off.
Props to Fluid Motorsports for handling my many orders as it took WEEKS to find a set of wheels. Originally I ordered the 5zigen ZR+ 520's but they didn't have my sizes so I decided to spend way more money just to piss topgear8 off. The lugs I ordered are the 5zigen Proracer 52mm(long ones) in blue. It turned out to be an AWESOME combo because the colors match perfectly. Specs:Gunmetal (looks bronze doesn't it) 18x8.5 +38 Semi-Concave Front / 18x9.5 +38 Deep Concave Rear I am perfectly aware I need to drop the car...I am currently eating out of a fucking can in order to get these wheels...but at least I'm losing some weight in the process. Tein S-Techs are coming in next week. Be patient. http://farm3.static.flickr.com/2550/...50973702_o.jpg http://farm3.static.flickr.com/2611/...88929d8e_o.jpg http://farm3.static.flickr.com/2438/...2e124fe7_o.jpg http://farm4.static.flickr.com/3143/...70ec703a_o.jpg http://farm3.static.flickr.com/2549/...cd690c53_o.jpg http://farm3.static.flickr.com/2582/...20a478bc_o.jpg http://farm3.static.flickr.com/2547/...dc13f72f_o.jpg http://farm3.static.flickr.com/2519/...0632c186_o.jpg http://farm3.static.flickr.com/2506/...3cc8babb_o.jpg |
Sexy...Glad you are loving them.
:) |
Originally Posted by Fluid Motorsports
(Post 3105349)
Sexy...Glad you are loving them.
:) |
We have 2 new shirts in our apparel section they are printing as we speak ;)
some are already pre ordering |
tatally awesome love the deep concave rears really looks good
|
nice man, i'll see how my 8.5 +25 all around goes next week
|
^Nice choice! looks good.
|
You wont regret getting the works over 5zigens!!
You're car will look super clean with a drop will look even better! |
Originally Posted by tiltmode43
(Post 3106489)
You wont regret getting the works over 5zigens!!
You're car will look super clean with a drop will look even better! Rear = 18x9.5 +38 with a 265/35 tire. |
^You will be fine in the rears. If you do get rubbing over some bumps then a little bit of negative camber will solve it.
|
I sound like I don't know how to speak english in my last post with that fractured sentance, lol.
You should be fine with that spec and the minimal drop. As top gear said it would be very close so you a touch of camber would do the trick. Congrats on the wheels again! |
Originally Posted by tiltmode43
(Post 3106937)
I sound like I don't know how to speak english in my last post with that fractured sentance, lol.
You should be fine with that spec and the minimal drop. As top gear said it would be very close so you a touch of camber would do the trick. Congrats on the wheels again! People are starting to come up to me and telling me how much they used to hate my old wheels. Makes me feel good and bad I guess. Question to Work owners: What center caps will work with my CR Kai's? Do you think I could get the stock gunmetal center caps that come on the R3? Too small? |
Question # 2
Should I go decals or no decals? I'm asking because I tried just a second ago...and it may be one of the hardest things I ever did in my life. I honestly don't know the correct way. |
Originally Posted by SilverHokie
(Post 3109414)
Question # 2
Should I go decals or no decals? I'm asking because I tried just a second ago...and it may be one of the hardest things I ever did in my life. I honestly don't know the correct way. |
I would go with the decals, I like the way they look on the work wheels.
|
Originally Posted by SilverHokie
(Post 3108978)
Question to Work owners:
What center caps will work with my CR Kai's? Do you think I could get the stock gunmetal center caps that come on the R3? Too small?
Originally Posted by SilverHokie
(Post 3109414)
Question # 2
Should I go decals or no decals? I'm asking because I tried just a second ago...and it may be one of the hardest things I ever did in my life. I honestly don't know the correct way. |
i just looked at the wheel on WORK's website and stuck them on. didn't really think too much about it, just cut out the stickers and slapped them on.
you cannot have center caps for our cars with these wheels. the rear axle shaft protrudes too much for and center cap to fit. |
Originally Posted by SilverHokie
(Post 3106597)
I was just going to ask that actually. Do you think I will have any problems with Tein S-Tech's with my specs? I don't THINK i should. I have a TON of room in the front...but the rear may be close. I know its only a .7 inch drop though.
Rear = 18x9.5 +38 with a 265/35 tire. now i run 255 all the way around, but that's a totally different story. |
Thanks for the replies. I am gonna have to take some scissors to that decal sheet now. I fugged it all up but maybe I'll be able to salvage most of the stickers on that one sheet.
What i did was try to peel off the covers on each side first. I would have figured that was the wrong way if I could read Japanese. |
the wheel faces look kinda flat.
|
damn, everyone and their grandmother has CR-Kai now...hahaha. they are sexy wheels tho.
i'm glad i painted mine gold...need to stand out a bit ;) looks good silverhokie and dezau |
^ lol well dan, u set the example. trust me, it's you who cost me these wheels... damnnnn u....... lol
and nuke, they are 8.5 +25 which is semi-concave. i never was fond of the fully deep concave nways... they look too... aggressive on the 8 and no offence to u dan, u did a really great job turning ur 8 to a real aggresive 8, it's just i don't think my apperance package would blend in well with the 9.5 deep concaves |
for the blue lug nuts, i assumed the 4 close ended ones are the wheel lock, but why the rest or open ended?
|
Originally Posted by c41250n
(Post 3117566)
for the blue lug nuts, i assumed the 4 close ended ones are the wheel lock, but why the rest or open ended?
Dezau looks good...+25 worked out pretty good for you it seems. I will however disagree with you about the deep concave. My rears look delicious. I'm with DanOMite a little bit, even though I am a late comer to the Work party. Look at the wheels I USED to have though. I would not like to see the CR Kai's go the way of the Enkei RPF1...but at the current price point that shouldn't happen anytime soon. |
All times are GMT -5. The time now is 08:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands