im about to get these wheels what do you think? will they fit?
#1
Registered User
Thread Starter
Join Date: Oct 2003
Location: MI
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
im about to get these wheels what do you think? will they fit?
these are the ADR X factors, I am really into them, similar to DPKs i think just not as rounded.
they are 19x8 with a +35 offset, will I fit? Tires are 235/35/19.......am I ok with this???
Thanks...
please let me know what you think? Its going on a black 8
Last edited by elite; 04-22-2004 at 01:55 PM.
#3
Registered User
Thread Starter
Join Date: Oct 2003
Location: MI
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
thx i appreciate that, not sure ill get them there, just took their pics cause its a good one. ive noticed over time their service is alot better but Ill be careful, thx.
fitment is my issue, 35 offset, not so sure about.....
fitment is my issue, 35 offset, not so sure about.....
#5
Registered User
iTrader: (2)
Join Date: Sep 2003
Location: Cincinnati
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
35mm offset moves the outer edge of the rim & tire 0.6" farther out than stock. That's pushing the limit of having sidewalls rub on the fenderlips. 40-42mm offset's a safe choice for an 8" rim. I don't know if someone's done a 38mm offset w/8" rim here yet or not.
I think that rim is attractive, simple, stylish and not overbearing.
I think that rim is attractive, simple, stylish and not overbearing.
Last edited by Ned M; 04-22-2004 at 06:27 PM.
#6
Originally posted by 8pex
I like the wheel, the problem is all those screw heads. They are a pain to clean, especially with all the brake dust the 8's are giving off.
I like the wheel, the problem is all those screw heads. They are a pain to clean, especially with all the brake dust the 8's are giving off.
#9
mmm... tastes like jesus
Join Date: Oct 2003
Location: Jacksonville, FL
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mrtux
i agree. i really never understood the purpose of those screwheads...are they for show? or what?
i agree. i really never understood the purpose of those screwheads...are they for show? or what?
If the wheel is a two or 3 piece design then those screws are there to bolt the rim together.
typically, multipiece wheels are extremely lightweight compared to their single piece counterparts. the single piece rims are cheaper to make though because the manufacturing process and materials costs are way lower.
Ray
#10
Cones need lovin' too!
Join Date: Aug 2003
Location: Beavercreek, Ohio
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
I got my winter wheels through wheelmax.. it was a gamble, but I had no problems. Beware all the same. Don't count on them to know the proper offset, specify yourself.
Thread
Thread Starter
Forum
Replies
Last Post
JimmyBlack
Series I Major Horsepower Upgrades
273
02-10-2020 10:23 PM
projectr13b
Series I Do It Yourself Forum
1
09-06-2015 01:04 PM