Last option for wheels, Enkei RPF1 in 17" or 18"?
#28
One ball, corner pocket
Joined: Apr 2004
Posts: 2,053
Likes: 1
From: Fontucky, right next to Patriotville
I have a set of RPF1's with sticky rubber already on them if your interested in a track ready..in the 18x9.5 +45 special order option . Willing to ship and they are ready to go.
#29
I have RPF1's, if you want center caps you need to tell them when you order or they will be sold separatly. Mine are 18.5 with 245/18 on all for corners. They have a 35 offset that puts them within a 1/4 inch of the rear wheel wells. If I went any wider I would of had to roll the fender. fyi
#32
Those are not the special ones made for our application. The 9.5"x18 Enkei's with 45 offset allow up to 275 or so width, and at least w/275 require no rolling. BTW how does the 245 work? Isn't it stretched too much for the wheel width? Most tires spec only up to 9" for a 245.
#35
These are 245/45/17 on 17"x9" wheels 45mm offset, car is lowered a bit w/coilovers ~20mm, so a bit bigger diam than we're talking but smaller than oem..
1) yes - unless someone's as-yet-avail flash unit allows the change in the ECU where the wheel diameter is. Hint, hint.
2) I think they do, but it's your opinion that counts. What do you think?
3) To me they look fine, but unfortunately I don't have any from the back. Here's one from the front though...
1) yes - unless someone's as-yet-avail flash unit allows the change in the ECU where the wheel diameter is. Hint, hint.
2) I think they do, but it's your opinion that counts. What do you think?
3) To me they look fine, but unfortunately I don't have any from the back. Here's one from the front though...
hey spin, what enkei's are those ur running? damn they look sexy!
Thread
Thread Starter
Forum
Replies
Last Post
Racingjunkie
Series I Wheels, Tires, Brakes & Suspension
2
09-29-2015 05:05 PM
Evan Gray
Series I Trouble Shooting
0
09-26-2015 12:30 PM