Hey guys just got a new product for the RX8. Front Adjustable sway bar links. We also have sway bars front and rear and control arms for the RX8 coming next week.

Throw your opinion out there and if interested in getting these contact one of your authorized RX8Club vendors for ordering!



To further complete the ultimate in suspension upgrades, Agency Power has released their front adjustable sway bar links for the Mazda RX8. These sway bar links are to go hand and hand with our solid rear links and our soon to be released sway bars and rear control arm kits. The AP front sway bar links offer you adjustability for setting up the suspension. These will enable you to properly corner weight the car for optimal handling. The 6061 CNC machined centers have flats cut in place for easy access for adjustments. The hardware is all high strength steel and the kit uses nylon locking nuts. The left and right hand jam nuts keep the adjustments secure in place when tighten down.

One of the most over looked parts of suspension is the spherical rod ends. Agency Power does not short this area and that is why our parts cost more. These spherical rods are designed to last a long time in a suspension component. A 3 piece design, these rod ends are stainless steel and have a Teflon liner to keep a secure and tight fit. Never occurring premature wear or clunking noises that poor quality rod ends have. The Agency Power Adj. Front Sway Bar Links are sold in pairs for all 03 and up Mazda RX8's. Come in Agency Power Speed Red color.

Part #: AP-RX8-205

MSRP: $175.00

http://www.agency-power.com/aprx8flink.htm

DEALER INQUIRIES WELCOME

 

sounds good. i'll be watching for the release of these components.

 

would these work with all aftermarket sway bars?

 

do they require drilling out the holes to make them bigger or are they a direct bolt-on?

denward

 

Thanks guys. They are released already. They work with factory, Agency Power sway bars, Tanabe, Whiteline. They are a direct bolt on. No modification required.

You can always email any questions as well to sales@agency-power.com

 

Here is a picture of our rear link with our sway bar. Direct bolt on like factory. Should have front link pics tomorrow installed.

 

how about racing beat sways?

 

i've checked out vividracing's site (very up-to-date) and noticed they already have these available. i'm waiting for your sway bars to debut so i can make one order. please let me know when they are released (available for purchase) here or via PM. i look forward to putting them thru the paces! thanks.

dd sends...

 

I got the rear links with racing beat sway. Nice quality and seems to be a improvement over the stock links.

 

since they fit with the stock sway bars, they must fit with he MS sways too, right?
are the sways already available?

 

anyone

VividPepsi do you sent your products outside the US? I'm kind of interested...

 

I've got the agency rear links in gold, can the fronts be finished to match?

Also, has anyone had a problem with the agency rear links and stiffer bar breaking the welds on the rear suspension links? (I do stress analysis in aerospace, and am a little untrusting of welds in general, just wondering if I'm being paranoid worrying about snapping off the stock lugs on my car....)

For those that are wondering, if the links will work with the stock bar, then they should work with any bar that'll work with the stock links (RB included).

 

thanks, that means they definately work with the MS sways...

 

Do these work with the RB sways? My take is no?

 

To answer my own question, they will fit the RB sways as long as you haven't drilled the RB sways if you installed the RB end links.

 

Anybody know how to install/adjust them? thanx