offset +22 good for rx8
Let me know
Thanks

 

No - too low; you'll have to do some serious rolling and stretching of the fenders...

 

Depends on how much fender modification you can deal with.

 

ohh.....I guess I have to go more than 35mm....
Thanks Guys~

 

I have +28 and I had to roll on a 9.5 Inch Wheel.

 

i currently have 17x10s in the rear with 35 offset with 255/40r17 and i have no rubbing issue at all. it all depends on the size of the wheel. you cant just give us the offset.

 

Considering that the OE offset is something like 45mm...
I'm running 42mm in the back and 37mm up front.
Just barely clears.

 

I thought the offset on stock was 50mm.

 

I don't think its that high. I think the '6 is in that range, though.

 

im running a 30 in the rear 9.5 rim with a 275 tire with fender trimming, no rub at all. But without the fender trim it will rub like crazy

 

the offset is 50.

beers

 

depends on the width of the rim and is this for the front/rear.

post more detailed info on the rim if you want a correct answer. also... got one sticky thread just for this... no need another thread.

 

I think im running one of the widest rims and offset on this forum.

19 x 10 with a 25MM offset 275 tire in the rear. I had to CNC machine the hubs of my rotors / roll and stretch the fender and cnc the rear hub of the wheel to get them to fit. I do not rub very often, but on the occasional time i do.

 

Ok...
How about
18 X 8
18 X 8.5
18X9
18X10

How about these width??
What is the good offset for these width???
30-40mm is good right??

 

Just stick with a +35 and up offset and you'll be fine.

 

i would reply with the information ur looking for but this is in the wrong thread.

CHEEEEEEEEEEEEEEEEEEE!!!!!

 

http://www.1010tires.com/tech.asp?type=wheels#offset


beers

 

how bout
rear- 18x9.5 with either a +25 or +38 offset
front - 18x8.5 with either a +30 or +48 offset

which ones would work best on my 06 rx8? i reall dont wanna do no cuttin or rollin or nothin! car is not lowered!

 

When my spacers come in I'll be right around +23 on a 18x10. I could buy the same wheel in a +15, but I think even with some super low pros and some serious stretch, it wouldn't work.

 

nice 2 year bump

 

Post in the "will it fit" thread...

 

fixed

 

I want to run this set up 255/35/18 offset et30. I am on 2 inch lowering springs. Can I do it?