Hey guys .. im running 18'' stocks on my rx8 .. just put lambo doors on it but its not complete without some bling bling...

I having some trouble with the fitting on my rims. I am looking for 19's (staggered). I was thinking 19x8.5 and 10. I was looking at the Zinik Sofi's Z21

Im not sure what offset to get. Right now after measuring my rims i get a tolerance of 15mm (F) and 25mm(R) to play with..

Basically i need a deep lip . .now i think these rims already have a deep lip so i may be able to go with 19x8.5 ..
Take a look and let me know what offsets you guys think will flow.. staggered or not..
Ebay have lots off different fittings

This is my take on it ( = added distance from stock in mm)

offset +35 +40 +45

19x8.5 = 21.5 16.25 11.25
19x9.5 = 34 29 24
19x10 = 40 35 30

Regards
Z

 

19x8.5 +35 (you can go lower)
19x9.5 +34 (may need to roll)
19x10 +40 or 35 (roll fenders)

 

19x8.5 w/ 45mm off set.

 

i talked to some folks at wheelwarehouse.. and they 19x8 + 42 offset & 19x10 + 35 ..

 

Click this link,,,,

http://www.1010tires.com/WheelOffsetCalculator.asp

 

the stock wheel is 18x8 +50. what's the point of going 19x8 +42???

 

Good question.. but im not really sure.. this is what the dude at wheelwarehouse said..

"Ok, when these wheels hit in November your going to be looking at 19x8 + 42 offset & 19x10 + 35 offset with both wheels having a 6 inch lip. "

It might be the way the wheels are made or something.. im still confused about the +35 offset.. i think it'll take the wheel 15mm futher out the fender

 

Reason for the offsets for 19x8 +42 is so that they can look flush with the rear as they are goin to be futher out.. acutaly im thinking of goin with 19x8 + 35 and 19x10 +40 .. i think this will do the trick.. might have to roll the fenders.. but thats ok

 

19 x 10 +40 fits all four corners, staggered is for clueless wannabe 'tards ...

 

naw, we just like the look. i bought mine off FE3P so i had no specifics, but if i were to do it again i'd go 9.5 all around. one day...