Notices
Series I Wheels, Tires, Brakes & Suspension

Possibly getting these enkei's need feedback

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 11-14-2007 | 02:44 AM
  #1  
rollerbldes's Avatar
Thread Starter
Registered
 
Joined: Sep 2005
Posts: 627
Likes: 0
From: OC
Possibly getting these enkei's need feedback

What do you guys think about these?
Enkei Performance Series WDM Gunmetal
http://www.tirerack.com/wheels/Wheel...2GMML&i2_Qty=2

Also, can someone explain to me the +42mm offset?
Old 11-14-2007 | 03:02 AM
  #2  
ocrapitzleon's Avatar
fō'tə-jěn'
 
Joined: Jun 2006
Posts: 656
Likes: 0
From: Twin Turbo FTW
No!
Old 11-14-2007 | 10:55 AM
  #3  
bruce_van's Avatar
Bruce Van
 
Joined: Jan 2006
Posts: 874
Likes: 0
From: the OC
One side of your car will look good, and the other side will look like you have the wheels backwards. This would irritate me.
Old 11-14-2007 | 12:05 PM
  #4  
Gimlet's Avatar
Lurking
 
Joined: Sep 2005
Posts: 120
Likes: 1
From: Austin, TX
Not bad looking, but heavy at 28lbs. Stockers are 22.
Old 11-14-2007 | 01:17 PM
  #5  
rollerbldes's Avatar
Thread Starter
Registered
 
Joined: Sep 2005
Posts: 627
Likes: 0
From: OC
Originally Posted by bruce_van
One side of your car will look good, and the other side will look like you have the wheels backwards. This would irritate me.
LOL You are right!

Although It wouldn't bother me. We are in 3D world. It is impossible to see both sides of my car at the same time.

This one is not side-oriented.. but I still like the previous better.

http://www.tirerack.com/wheels/Wheel...All&sort=Brand

Last edited by rollerbldes; 11-14-2007 at 01:21 PM.
Old 11-14-2007 | 02:27 PM
  #6  
c41250n's Avatar
Registered
iTrader: (5)
 
Joined: Dec 2005
Posts: 1,257
Likes: 0
From: Daly City Ca.
no to both..
Old 11-14-2007 | 08:21 PM
  #7  
Razz1's Avatar
Mu ha.. ha...
 
Joined: Aug 2004
Posts: 14,361
Likes: 3
From: Cali
I think they are nice but 6 lbs. more than stock?

Too heavy for me.
Old 11-17-2007 | 12:17 PM
  #8  
SolarYellow510's Avatar
Registered User
 
Joined: Jul 2007
Posts: 205
Likes: 0
ASA, Kazera and Kosei all have options that are priced comparably to those Enkeis and the same weight or less than stock. ASA and Kosei are both great quality vs. price. Enkei's higher-line stuff is on my short list of the world's best, making it all that much more impressive how well it's priced, but their cheap stuff seems like it's just there to feed Pep Boys.
Old 11-18-2007 | 03:12 AM
  #9  
sleeperx8's Avatar
anti-bandwagon
 
Joined: Mar 2006
Posts: 160
Likes: 0
From: Diamond Bar, CA
i think he likes the style...

it reminds me of Dmix's rx-8. except his weren't as "smooshed"
Old 11-18-2007 | 03:53 AM
  #10  
Sidus's Avatar
Registered User
 
Joined: Feb 2006
Posts: 66
Likes: 0
From: Santa Monica/ Northridge, CA
Originally Posted by rollerbldes
What do you guys think about these?
Enkei Performance Series WDM Gunmetal
http://www.tirerack.com/wheels/Wheel...2GMML&i2_Qty=2

Also, can someone explain to me the +42mm offset?
our stock rims have +50mm offset
lower offset means it will stick out a little bit more than stock

as I know, the most aggressive offset people running without rolling fender is:
front +29mm, rear +35mm
but it depends on how wide your tires are and how low your suspension setup is..

for your rims of choice, i think its ok, since ur car is black.
but for performance , lighter is better...

if i were you, i will take a look at for sale section
there are some good deals of great used rims
Old 11-18-2007 | 08:11 AM
  #11  
WoodsOfGreenRx8's Avatar
Registered User
 
Joined: Dec 2006
Posts: 1,015
Likes: 0
From: Omaha
I run a +41MM offset on my Volks, at 18x9 and I had no rubbing issues till I got my body kit..
Old 11-18-2007 | 09:41 AM
  #12  
altspace's Avatar
Eccentric Shafting
iTrader: (2)
 
Joined: Nov 2006
Posts: 4,649
Likes: 0
From: Cape Cod
Originally Posted by bruce_van
One side of your car will look good, and the other side will look like you have the wheels backwards. This would irritate me.
I have always thought the same thing with directional spokes. They should make them so that the rotation of the spokes are the same on each side.
Old 11-19-2007 | 12:44 AM
  #13  
rollerbldes's Avatar
Thread Starter
Registered
 
Joined: Sep 2005
Posts: 627
Likes: 0
From: OC
Thanks for the feedback guys. As far as the weight goes. 4x6=24lb which is 0.8% of the ~3000lb I doubt it's going to make much of any difference.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM
92trbolzr
Series I Trouble Shooting
24
07-08-2020 07:59 AM
fourwhls
RX-8's For Sale/Wanted
7
02-20-2019 05:16 PM
RX8mzda
New Member Forum
1
10-14-2015 05:12 PM
RotaryMachineRx
RX-8 Parts For Sale/Wanted
1
09-29-2015 10:26 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Possibly getting these enkei's need feedback



All times are GMT -5. The time now is 09:16 AM.