Rear rotors held on with what???
03-20-2005 | 10:28 AM
#1
Thread Starter
Registered
Joined: Nov 2004
Posts: 971
Likes: 0
Rear rotors held on with what???
Replacing my Rotors this weekend:
From what it looks like the rear rotors are held on just by the rim, held in place by caliper. The front ones had two phillips head screws holding them on the rear ones didn't. I just want to make sure I am not missing something on the back rotors. Anyone else have experience with this?
From what it looks like the rear rotors are held on just by the rim, held in place by caliper. The front ones had two phillips head screws holding them on the rear ones didn't. I just want to make sure I am not missing something on the back rotors. Anyone else have experience with this?
03-20-2005 | 09:41 PM
#2
Original Turbo 'd Auto !!
Joined: Mar 2004
Posts: 2,133
Likes: 4
From: Surprise, Arizona
Most cars are like this. There really is no reason to have a diffrent type of fastener system to hold the rotor on and then bolt the rim. This In turn sandwhichs the rotor between the rim and hub.
Couldn't figure why the screws are there. Anyone?
Couldn't figure why the screws are there. Anyone?
Thread
Thread Starter
Forum
Replies
Last Post
