Jleorx8

I'm all stock. Can I use spacers on my wheels? How wide can I go? with out damage the fenders.
Thanks.

romycha1

Why do you want spacers....

10mm in the back and 5mm in the front. After that you'll need longer studs unless you get some ET lug nuts.

05rex8

iTrader: (7)

dont do it.........just get some aftermarket wheels with a more aggressive offset...don't ask questions....just don't do it.

Jleorx8

after market wheels, mmmmmm sound good but, Budget is not pretty good now, thats the reason, looking for alternatives.

romycha1

Oh.. you just want a wider stance? I'm guessing thats what you mean by alternatives... I have an extra set of 5mm (2) spacers I'll sell you if you want.

Aipex8

iTrader: (1)

Don't listen to all the spacer haters, if you buy quality hub-centric spacers you shouldn't have a problem. You should be able to go with 15mm in front and 20mm in back. Eibach and Project Kics are a couple of brands that come to mind. 15mm and up usually have lugs built in to them so you don't have to replace your's with longer ones.

alexisthemovie

nothing wrong at all with hubcentric spacers. eibach/kics/h&r/tc-sportline are all reputable brands. then again... how hard is it to make a piece of metal with studs sticking out?

You can run negative offsets on the stock (or any x8) wheel on rolled fenders.

DrewMan

can you tell me how to fit 18.0 x 10.0 -20 on just rolled fenders?

youd have to cut them out completely!

alexisthemovie

if you could read, i clearly stated on an 8" width wheel. on a 10", I could fit a +10 offset or lower.

rudi888

Need help too..
Currently on 19x8 with offset only +40 all around..
How wide can i go if i wanna put spacer???

alexisthemovie

you can throw on a 30mm spacer and clear with rolled fenders

altspace

iTrader: (2)

Yet another spacer thread?

alexisthemovie

was it really necessary to post that? especially after 2 days without a response...