Notices
Series I Wheels, Tires, Brakes & Suspension

Stance

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 06-19-2005 | 07:01 PM
  #1  
Jaisin's Avatar
Thread Starter
Jason
 
Joined: Aug 2004
Posts: 216
Likes: 0
Stance

I like the RX-8's stance right now, but I think I wanna change it a bit. I've read up about Tein Lowering Springs, but I still don't know which ones I should get. I don't exactly understand the difference between the Racing Beat ones and the Tein ones. A lot of people told me to go with Tein because they have Tein. Does anyone have any input on changing the 8's stance? I'm also on a tight budget, so the Teins have a really appealing price.
Old 06-19-2005 | 07:39 PM
  #2  
RotaryNoob's Avatar
Hi
 
Joined: Sep 2004
Posts: 346
Likes: 0
From: SoCal
You'd get much better response in the "wheels, tires, brakes, and SUSPENSION" forum but the difference between the Tein and RB are that the RB barely drop it at all. They keep almost the exact same feel but I think drop it an inch.

Tein drop it about a half inch more and you gain a firmer ride with a tad more bounce. The Tein drop is still very small. I was expecting more.
Old 06-19-2005 | 08:15 PM
  #3  
Jaisin's Avatar
Thread Starter
Jason
 
Joined: Aug 2004
Posts: 216
Likes: 0
Originally Posted by RotaryNoob
You'd get much better response in the "wheels, tires, brakes, and SUSPENSION" forum but the difference between the Tein and RB are that the RB barely drop it at all. They keep almost the exact same feel but I think drop it an inch.

Tein drop it about a half inch more and you gain a firmer ride with a tad more bounce. The Tein drop is still very small. I was expecting more.
Cool. I'm so used to reading the General forum, and I forget the others exist. So you like your Teins? Will I have any problems? As of now, the Teins fit my budget more, and they still look like a good buy.
Old 06-19-2005 | 08:57 PM
  #4  
\\Konig\\'s Avatar
turrrbo!
iTrader: (4)
 
Joined: May 2004
Posts: 2,325
Likes: 4
From: Santa Barbara
i have the tien s techs installed and have had no problems so far. The ride is not much more harsh. I can only feel the difference in harshness on really rough roads. The drop is about 1 inch, which IMO looks great. Also I got a great price on the tiens for about 199 with shipping/handling/tax incuded.

Also, just in case you dont know, their are two kinds of tein springs.

Htechs, which lower the car about .5 of an inch (similar to RB springs) and do not affect the bumpiness/harshness of your 8's ride.

and Stech (the ones I have) which lower it approx. 1-1.5 inches and make the ride a bit more harsh.

hope that helped.
Old 06-20-2005 | 02:35 AM
  #5  
RotaryNoob's Avatar
Hi
 
Joined: Sep 2004
Posts: 346
Likes: 0
From: SoCal
If anything, I would have gone with something that provides a little more of a drop. The Teins are definitely my choice over RB and Tein.
Old 06-20-2005 | 03:21 AM
  #7  
IZoomZoomI's Avatar
Boost needed
 
Joined: Dec 2003
Posts: 2,557
Likes: 0
From: San Jose, CA
umm hmm I don't know trig, I think i've read somewhere up there something about a tight budget... not sure though can you maybe re-read his first post?
Old 06-20-2005 | 01:50 PM
  #8  
Jaisin's Avatar
Thread Starter
Jason
 
Joined: Aug 2004
Posts: 216
Likes: 0
Originally Posted by IZoomZoomI
umm hmm I don't know trig, I think i've read somewhere up there something about a tight budget... not sure though can you maybe re-read his first post?
I could save up for coilovers, but I don't consider myself that hardcore when it comes to suspension mods. Especially since I live in Louisiana and our roads suck.
Old 06-20-2005 | 04:13 PM
  #9  
dankgummy's Avatar
Registered User
 
Joined: Aug 2002
Posts: 330
Likes: 0
From: Arlington VA
i have the Htechs and the ride is exactly the same as factory setup....kinda which i got the Stechs as i now have 19"s and with the thinner tire, there's still the gap in the wheel well.....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mazdakevin
New Member Forum
14
03-10-2016 01:32 PM
Endless Rotaries
Auto RnD
107
05-10-2010 06:41 PM
Endless Rotaries
Series I Wheels, Tires, Brakes & Suspension
11
07-02-2008 02:23 PM
Endless Rotaries
General Automotive
23
10-19-2007 08:51 PM
rexi
Australia/New Zealand Forum
12
09-24-2006 08:48 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Stance



All times are GMT -5. The time now is 11:36 AM.