Stance GR coilovers fast question
#1
It's Complicated
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Dirty Jerz
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
Stance GR coilovers fast question
After doing some research I've decided to buy a set of Stance GR's because of the positive feedback I've read here and other forums.
I wanted to know if your are anything's I should be aware about when installing- pre-load, ride height, etc.
Also, after installing how much do these coilovers settle over time?
Any help form people with these installed would be great. thanks guy
-Neil
I wanted to know if your are anything's I should be aware about when installing- pre-load, ride height, etc.
Also, after installing how much do these coilovers settle over time?
Any help form people with these installed would be great. thanks guy
-Neil
#2
mkuhnracing.com
iTrader: (3)
They don't take anytime to settle. You don't adjust the height of the springs, you adjust the height of the shock...Watch Rishie's video that he posted in his thread.
The only problem some of us have had is that the upper rear mounts were backwards. You'll see what I mean when it comes time to install it, If they fixed it, then good, If not, then just unscrew the mount from the shock and turn it around, not hard at all.
The only problem some of us have had is that the upper rear mounts were backwards. You'll see what I mean when it comes time to install it, If they fixed it, then good, If not, then just unscrew the mount from the shock and turn it around, not hard at all.
#3
It's Complicated
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Dirty Jerz
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
I've watched his vids-- very helpful
Do you remember what your measurements were in the rear between the two mounting points? Just wanted to know because as you know the rears are a PITA and it would be nice to mount them up just once without having to do it twice and uninstall the whole assembly.
I'm thinking of going with 9k front and 6k rear--- will this make for a comfortable ride for daily travel?
Thanks for the info bud
Do you remember what your measurements were in the rear between the two mounting points? Just wanted to know because as you know the rears are a PITA and it would be nice to mount them up just once without having to do it twice and uninstall the whole assembly.
I'm thinking of going with 9k front and 6k rear--- will this make for a comfortable ride for daily travel?
Thanks for the info bud
Last edited by Pico; 03-16-2010 at 05:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post
yankeepicker
Series I Trouble Shooting
3
09-11-2015 05:42 PM