Optical TDI

iTrader: (2)

My RX8 only has 4,000 miles. I've added sway bars and racing beat springs. Now when traveling over small bumps on the road it sounds like something is loose. The sounds reminds of a loose sway bar end link nut. However I've checked those connections along with the bar mounts. Plus also the struts bolts on top and bottom. And lastly the alignment bolts since it was aligned recently. Everything I can think is tight.

Could the struts be bad? Early STI's had a struts problem. They clunked at low speed bumps, but this is not quite the same. And everyting feels great when corning. Please help me diagnose this.

Thanks.

DarkBrew

Weird to have a problem with such low mileage but could it be your end links? The links will start to clunk as the ball joints come loose.
Get the RB end links if yours need replacement

Edit: Which end is the clunk coming from?

DarkBrew

I mean the ball joints in the end links.

Razz1

don't they clunk if there isn't enough grease?

DarkBrew

bassy

I've just noticed the clunking on my car recently as well. It seems to come from the right front (passenger's side), and only when I'm slowing down on rough roads. When I'm slowing down on smooth roads (no undulations), there's no clunking. My car has 19,8XX miles.

I brought my car in for an alignment yesterday and asked to have the endlinks checked out. I was told everything looked and felt fine. So now I'm still driving around with the damn clunking noise...

Optical TDI

iTrader: (2)

The noise is from the front, both sides. I don't think it matters, but the bars are Hotchkis and they've only been on about 2,000 miles.

Optical TDI

iTrader: (2)

The noise is from the front, both sides. I don't think it matters, but the bars are Hotchkis and they've only been on about 2,000 miles.

SouthFL

https://www.rx8club.com/showthread.p...oise+whiteline