Originally Posted by mremm04
(Post 3040131)
ok so how does the low pressure light work how does the car know when the pressure is low cuz im about to buy a aftermarket rim but i don't want that low pressure light to stay on all the time. and what mod do u have on ur car man
|
My check engine light came on, does anyone know why?
|
why is there a milky like substance on my dipstick?
|
Work Emotion
Oki
Work Emotion Cr Kai Should I order: 18"x8,5" +38 for front (mid taper) Or go 18"x9,5" +38 all around (deep taper) Can I use my old 225 tires on the 18"x9,5 for the front? (and mabe change them later with some wider) And if I have goy it right, 265 will fit for the rear without a roll.. (18x9,5+38) |
are you lowered?
|
No, stock. Thinking of keeping it that way to.
|
I highly recommend getting 9.5 all around; however, I dont recomment stretching your 225 tire around a 265 tire rim width
|
So 18x9,5 +38 on all four wheels.
Should it be 245/40/18 for the front and 265/40/18 for the back or 265 all the way? And will 265 in the front fit without roll? Don't have work wheels dealers anywhere around her so I'm ordering them from Japan, need to get it right :) |
If you don't plan on dropping 265 will be fine - so will 275. You'll be too high up to rub anything.
|
so much math...aaahhh.
lookin at 19x8.5 +42 all around 245/40 or 35/19? all around wanting to lower it, either s.techs or eibach gonna work or no? |
I'm a fan of tall sidewalls for some reason but IMO 35 sidewall should work.
|
Both sidewalls will work, I personally would go with the 245/40
|
thats what i was leaning towards. what about lowering on the above mentioned springs..still gonna work fine?
|
Thanks!
Then it's Work Emotion Cr Kai - 18x9,5 +38 - all around :) Can't wait.. it's probably going to be a month before I get them though.. |
Originally Posted by megatr0n
(Post 3040886)
thats what i was leaning towards. what about lowering on the above mentioned springs..still gonna work fine?
|
thats a hint to go wider ;)
|
T-Rex - ever try those 255's?
|
if i have a wheel thats 18x8.5 with a offset of 50 what spacer do i need to make the wheels flush? my car is lowered on tanabe gf210 btw
|
flush with the cars fenders**
|
Originally Posted by kevinD1226
(Post 3041790)
if i have a wheel thats 18x8.5 with a offset of 50 what spacer do i need to make the wheels flush? my car is lowered on tanabe gf210 btw
|
Originally Posted by kevinD1226
(Post 3041790)
if i have a wheel thats 18x8.5 with a offset of 50 what spacer do i need to make the wheels flush? my car is lowered on tanabe gf210 btw
|
I'm going to try 18x10.5 +12 in the rear this weekend, eek!
|
Man you better have some stiff rear springs so it just doesnt eat through your tire!
|
Running wheels without potential full stroke is borderline pointless. Need I say more? :naughty:
|
damn tilt that's impressive... take pics
|
All times are GMT -5. The time now is 12:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands